-
**Describe the bug**
If a pytket circuit containing unused classical registers is converted to PHIR, these registers are missing from the generated PHIR.
**To Reproduce**
```python
from pytk…
-
According to https://github.com/Anime4000/RTL960x/blob/main/Docs/OMCI_CLI.md , there is interesting information in OMCI MIB:
1) Cardholder. POTS card presence may be configured here
2) Circuit Pack.…
-
Power:
- [x] Check for short circuit on VBUS rail
- [x] Check for short circuit on 3.3v rail
- [x] Power device via USB without battery attached
- [x] Check 3.3v rail voltage
- [x] Check 2.5v sta…
-
Working a way to access the RAM of the machine using CV could be interesting.
- [ ] Allowing RAM output would allow a user to select a RAM address and use the value at that address as a modulation…
-
### Environment
- **Qiskit version**: 1.1.1
- **Python version**: Python 3.12.4
- **Operating system**: Ubuntu 22.04.3 LTS
### What is happening?
AerSimulator and QasmSimulator cannot transpil…
-
Hi, would it be possible from the logic of the circuit to extract the values of the video signal to generate a modeline, the porches, the sync pulses the pixelclock etc etc?
It would be very intere…
-
Hello,
I am having problems with playback on a real sid chip. Partly sounds are not played correctly or not at all. It seems to me that it is either timing problems between the Sid chip and the emu…
-
I need someone to create a new CAN bus controller on a breadboard from scratch. There is available documentation on Sunstangs Teams. There is one prototyping board right now, but I don't think it work…
-
@toxieainc - as requested.
Machines using the DataEast controller represented by DE.VBS used an odd flipper control setup which facilitated staged flippers, which is not represented in the machine…
-
(Moving this from a comment in another issue because the cause was unrelated.)
On three separate occasions, a command to the opener's light resulted in the door opening. Unfortunately, I haven't be…