-
`livox_ros_driver2 git:(master) ✗ sudo ./build.sh humble
/opt/ros/humble/setup.zsh: line 6: ${(%):-%N}: bad substitution
/opt/ros/humble/setup.zsh: line 6: cd: -q: invalid option
cd: usage: cd [-…
-
How to make this code support livox_ros_driver2?
-
机器人上配备了Mid70和MID360,问题1:同时启动,MID360无数据;问题2:分别启动,MID70点云数据量肉眼可见的降低。
-
CMake Error: The following variables are used in this project, but they are set to NOTFOUND.
Please set them or make sure they are set and tested correctly in the CMake files:
LIVOX_LIDAR_SDK_LIBRAR…
-
I am getting this error, please help me to resolve this error
I am using Livox MID-360 Lidar and LIVOX_ROS_DRIVER2 with Ubuntu 20.04 and ROS1 Noetic..
Also haev sourced my ws_livox, but still error …
-
Hello,
I am using your code with the Livox MID-360 and livox_ros_driver2 ([git](https://github.com/Livox-SDK/livox_ros_driver2?tab=readme-ov-file)). It requires some modifications of your code that …
-
I downloaded Livox-SDK 2 and livox_ros_driver 2. when running logger from Livox-SDK 2, it works. But when trying to launch msg_MID360_launch.py and rviz_MID360_launch.py an error occurs. I'm using ROS…
h0uzd updated
5 months ago
-
Hello @Ericsii ,
I'm trying to get the Livox Mid360 Lidar to run on my computer but am currently unable to get any output in Rviz. When I run the commands `ros2 launch livox_ros_driver2 msg_MID36…
-
每个人都有一套自己独有且常用的性能测试思路,有了思路,就会形成一套常用的测试模型(xml文件)。
为了方便大家互相学习,在此集思广益,随后我会整理并发布在[《简明COSBench教程》](https://www.sineio.top/byte-of-cosbench/#/)上,希望可以给更多的人带来帮助。
- 格式建议如下:
【用途】
xxx
【模型】
COSBench配置文件…
-
Hi all, I've been attempting to configure two 2209 stepper drivers sharing a single UART on an STM32G0B1RE based board (using the stm32duino framework) and have come across an issue initialising both …