-
We tested this algorithm on the images we collected ourselves and found that the results were very poor. Our calibration board is printed directly, and our camera FOV is approximately 120 degrees. The…
-
| Required Info | |
|---------------------------------|------------------------------------------- |
| Camera M…
-
A few years a ago our team managed to launch all cameras with little lag [here](https://youtu.be/arrg-aW_Qyw?si=KmM5ti4W0RnddlVD&t=74), with what looks like ros1. Right now we're using gstreamer and …
-
A 3rd party source: https://github.com/BeckerFelix/ros_gmsl_driver
Start by:
- [ ] First running the NVIDIA sample binaries and being able to view the direct output of the GMSL camera feed
- [ ] Ins…
-
Hi!
Thanks for the greatest work. I got a problem when I tried to open LI-ISX019-GMSL.
OS : Ubuntu 16.04
1. Following this link https://github.com/LI01/linux_camera_tool/blob/master/INSTALL_…
Git89 updated
4 years ago
-
From time to time, we have all used $(info ) $(warning ) and $(error ) to help us debug makefiles, but we have also longed for the ability to turn logging on and off at specific levels, such as trace,…
-
Currently we can connect to a device via serial number, device type or usb port. I have 2 D457 GMSL/FAKRA that need to be recognized so I can only use the serial number option. I'd like to ask for the…
-
We have build autoware.ai on Drive PX2 with Drivework 1.2.4. However, the package autoware_driveworks_gmsl_interface, autoware_driveworks_interface has got complie errors. We cannot find dwImageFormat…
-
I followed the recently added ADI kernel build instructions and tried to boot from the SD card, but could not boot properly due to a kernel panic. It seemed that the root file system was not mounted p…
-
Hello!
I'm trying to run RealSense D457 camera on AGX Orin.
My hardware environment are:
- Intel RealSense D457 camera * 1
- Nvidia Jetson AGX Orin DevKit (Jetpack5.0.2) * 1
- [Leopard E3653-A0…