-
### Checklist
- [X] Checked the issue tracker for similar issues to ensure this is not a duplicate
- [X] Read the documentation to confirm the issue is not addressed there and your configuration is s…
-
Hi,
I'm trying to upload PULPissimo hello example on zcu102 board. Why the need for an external JTAG-HS2 adapter since connector J83 and J2 of zcu102 board support JTAG?
Anyway I've only DLC9LP X…
-
### Development Kit
Custom
### Module or chip used
ESP32-WROVER-E
### Debug Adapter
nanoDAP-HS
### OpenOCD version
v0.12.0-esp32-20240318
### Operating System
ArchLinux
### Using an IDE ?
v…
-
```
It would be great to see a second firmware with the same pin layout as the
original USBprog.
I'm using USBprog in combination with the 5V->3.3V level-shifter
(http://svn.berlios.de/svnroot/repos/…
-
If one follows this guide https://docs.google.com/document/d/1ZLD2jC9SxiCBk1NZLw667Tu3JuIk6PAyAxSHW7cWvu8/ one can not be certain whether the modification of the teensy4.1 was successful (or one cut i…
-
nanoDLA can be also used as a JTAG Adapter. (only JTAG , no SWD for now)
operation confirmed with both v1.2 and v1.3
https://github.com/elfmimi/ixo-usb-jtag/releases/tag/v0.0.1%2B
-
I am using Raspberry Pi Pico W with openocd-dirtyjtag and trying to flash/debug NXP LPC1837. Got the following error when I try to start openocd. Please help me in resolving it.
```
iotdev@iotdev:…
-
I implemented RISCV SoC on a Zcu102 fpga. I am trying to use openOCD and jtag-hs2 to download code to the board as instructed in the README. Does anyone know what could potentially cause this error an…
-
esp_usb_jtag (for example) need to be added as debug adapter.
openocd-esp32 needs to be compiled with support of esp builtin jtag support. I've tested it with esp-c3 and it works.
-
Hello @enjoy-digital,
I wanted to utilize the risc-v debug module provided in `core.py` within `litex/litex/soc/cores/cpu/cv32e40p` https://github.com/enjoy-digital/litex/blob/76a704377fbd2897a5ab…