-
Ich habe eben den Adapter zu Steuerung meines HF-LPB100 CCT Controllers installiert. Der Controller wird auch gefunden, ist jedoch noch nicht supported:
```
wrong device type. not yet supported!
…
-
I have flashed with both the newest firmware and web interface, and both my HF-LPB100 plugs work great, and are auto discovered by Home Assistant mosquitto broker.
But every time i restart HA, they a…
-
Hi Luís thank you for all your work on this project.
I have Fashed though UART//Seral and Orvibo S20 WiWo-S20-E2 with the original HF software since this module is based on a HF-LPB100.
Was able t…
-
If I change the device name (Bezeichnung) in the adapter config I receive the errors:
```
wifilight.0 | | error | Known names are: HF-LPB100-ZJ200, HF-LPB100-ZJ002, HF-A11-ZJ002, Mi-Light, AK001-…
-
Thank you for creating this library. It really makes my work with the G-Homa plugs a lot easier. It would be nice to also have the other commands available to node.js. Link quality, NTP server IP, etc…
-
have three controllers - all controllers are detected as HF-LPB100-ZJ200
it seams that my HF-LPB100-ZJ200 is LD868 (five channels)
and the UFO HF-LPB100-ZJ100 (LD??? )
one Contoller is UFO with 4…
-
Hello,
Thanks a lot for the work you've done!
I have a HF-LPB100 plug.
I've installed the latest 1v1 version on it.
I haven't connected it to anything, I've only been using it from the web i…
-
Updating of the channels doesn't work. The API does work with the modes, but not with the channels. I have a RGBWW strip, which should be compatable. Also tried the other lines.
![image](https://us…
-
Ciao, Andrea. Sto usando il tuo progetto (fantastico) per gestire su HomeAssistant il mio termostato BeSmart.
due info:
1) vorrei monitorare quante ore è acceso il riscaldamento. Sto usando un nuovo…
-
Hi,
It'd be really useful to have some usage instructions on this. If you could put something together on installation / setup I'd really appreciate it.
Thanks.