-
Updated PCB layout
-
### 4 Development of the invite flow tests 6.5k
We will develop automated tests of the invite flow (as used in ScienceMesh), testing all combinations of the systems that support it, namely Nextclou…
-
PDFs have been uploaded! I think I set the width of the routes to 12 mil, did I do this right? I also was not sure how to move the origin back to the edge of the board.
-
Sorry for not creating an issue earlier! I should have JPGs and original files for the schematic and PCB board under Electronics, with the parts used under docs. I'm not confident that I used the vias…
-
-
Addressed feedback from Dr. Palmeri. The original circuit was based essentially off the circuit that was done in class; I tried to address the missing components that you mentioned and also removed t…
-
This milestone covers any additions to IF or IF plugins in order to be able to create a manifest file to asses the IF lifecycle
tbc but top level aims are:
- create manifest that does a LCA for …
-
## Feature
- [x] Support TypeScript by default
- [x] https://github.com/eggjs/koa/pull/5
- [x] @eggjs/core https://github.com/eggjs/egg-core/pull/265
- [x] https://github.com/eggjs/egg-utils/pu…
-
I'd like to begin setting up certain milestone for a first ags4 release, to help with prioritizing tasks. IMO there are few tasks that must be done and without which completion there's not much point …
-