-
## Environment
* OS Version:Ubuntu 24.04
* ros Version: Jammy
* If this is a GUI or sensor rendering bug, describe your GPU and rendering system. Otherwise delete this section.
- Rende…
-
## Current Behavior
I fly my multicopter to missions trying to get some nice videos. Unfortunately the multicopter jumps abruptly at every waypoint especially at terminal ones (eg waypoint 3 at my im…
cptX updated
2 months ago
-
```
The following error was encountered while flashing the KK Multicopter
Blackboard through KKFLASHTOOL and USBasp. Required help
Flash the firmware from repository.
C:\Documents and Settings\R.…
-
```
The following error was encountered while flashing the KK Multicopter
Blackboard through KKFLASHTOOL and USBasp. Required help
Flash the firmware from repository.
C:\Documents and Settings\R.…
-
```
The following error was encountered while flashing the KK Multicopter
Blackboard through KKFLASHTOOL and USBasp. Required help
Flash the firmware from repository.
C:\Documents and Settings\R.…
-
## Desired behavior
The current gz-sim implements a system that incorporates a multicopter plugin based on the RotorS Simulator's setup. This plugin is only used to command the velocity of the ro…
-
## Describe the bug
In local position only flight of multicopter, Takeoff & Land exhibit very dangerous behavior
If you move vehicle after initialization, trying to land or takeoff again after movin…
-
```
The following error was encountered while flashing the KK Multicopter
Blackboard through KKFLASHTOOL and USBasp. Required help
Flash the firmware from repository.
C:\Documents and Settings\R.…
-
```
The following error was encountered while flashing the KK Multicopter
Blackboard through KKFLASHTOOL and USBasp. Required help
Flash the firmware from repository.
C:\Documents and Settings\R.…
-
```
The following error was encountered while flashing the KK Multicopter
Blackboard through KKFLASHTOOL and USBasp. Required help
Flash the firmware from repository.
C:\Documents and Settings\R.…