-
# Version Number
1.0.1
# Bugfix or Enhancement
Bugfix
# Description
There are several components where there are vias in pads.
This is a known issue to cause soldering problems, as the paste…
-
[DD-MM-YYYY] [Development Log in detail]
-
Research the different technologies for generating/storing power, including new technologies and systems that are likely to be used on commercial space vehicles. Consider the possible high requirement…
-
**Printer type** - MK3S
**Printer firmware version**- 3.8.1
**Describe the bug**
I'm getting repeated "ghost" y-axis crashes when printing models both from the SD card supplied with the printe…
-
Well I cant be the only person with this problem.
Tried the 1.1 version first then the 2.0 version with exactly the same issue.
SETUP
SKR1.4 turbo
connected using the direct adaptor to the board
…
-
ppoino-cars の formula-ppoino にある EV 関連の話のつづき．
https://github.com/y-yosuke/ppoino-cars/issues/4
-
### Bug Description
This is `bugfix-2.0.x` commit d84aff701e10a49d5ccc69ce323fdb0fdb84b6db
Long travels exhibit stuttering movement when ABL is configured and enabled.
If I switch ABL off by …
-
Hello,
I'm using the TinyG hardware with my 40W co2 laser cutter (made in china :-) ).
For toggling the Laser I tried to use the "M3" and "M5" and for PWM the "S" commands.
It looks like:
M5
G0 Xxxx…
-
I'm trying to get 2.2 Boards to work with an UART controller.
Until now I managed to get the Fork of Herleybob to spin the wheels but since that firmware doesn't really seem to be supported I conside…
-
@julienmctighe found this project:
- [`genericairplanemodel` (GitLab)](https://gitlab.com/m6029/genericairplanemodel)
which might be useful to (at least some sub-part) of our project.