-
I would like the following command:
`yakut format zubax.low_level_io.Access`
It prints out which format I should use to pass variables for this DSDL type.
-
The Zubax Orel 20 ESCs and many UAVCAN enabled sensor/actuators utilize the [JST GH](http://www.jst-mfg.com/product/detail_e.php?series=105) connectors with a pitch of 1.25 mm.
**Zubax Orel 20 Pino…
-
Run the RX logic in a separate thread. Raise an error during instantiation if PySerial is not available. Support the SLCAN command line extensions as documented in the [Babel datasheet](https://files.…
-
https://github.com/Zubax/opengrab_epm_v3/raw/master/annotationR5C.jpg
Pin numbers on the PCB are correct; Pin number on the picture are incorrect
-
@ctech4285 please remove branches that are no longer needed. See this page: https://github.com/Zubax/opengrab_epm_v3/branches. I specifically suggest to remove `PET_testing` and `degauss_debug`.
-
Update the text to state that the frequency shall be at least 19 kHz.
A reference oscillogram from https://forum.zubax.com/t/valenok-bug-fix/1940/3?u=pavel-kirienko should be provided in the Hardwa…
-
-
CANBUSによって、さらに配線がシンプルになるようです。
https://discuss.ardupilot.org/t/canbus-for-ardupilot-with-uavcan-and-uc4h/37021
動画
https://youtu.be/Y60CY4Yoc9A
-
https://forum.uavcan.org/t/uavcan-2019-roadmap/666
-
Some people are using high impedance AA Alkaline cells,....