Murph- gentlenav issues

Murph- / gentlenav

Automatically exported from code.google.com/p/gentlenav

0 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

gentlenav hardware？

#41 GoogleCodeExporter closed 9 years ago
1
Add a way to loiter at the current location

#40 GoogleCodeExporter opened 9 years ago
3
UART1 ISR optimization

#39 GoogleCodeExporter opened 9 years ago
5
Fix HILSIM

#38 GoogleCodeExporter closed 9 years ago
2
Improve default OSD Layout

#37 GoogleCodeExporter closed 9 years ago
2
Battery voltage input?

#36 GoogleCodeExporter closed 9 years ago
3
Allow disabling Telemetry RX Pin

#35 GoogleCodeExporter closed 9 years ago
1
loss of GPS communications is not detected and leads to stabilization issues

#34 GoogleCodeExporter closed 9 years ago
2
Stay in RTL mode until the Mode is manually switched

#33 GoogleCodeExporter closed 9 years ago
2
Add Feed-forward terms to stabilization and navigation

#32 GoogleCodeExporter opened 9 years ago
1
gyro and accelerometer offsets are recorded after wagging

#31 GoogleCodeExporter closed 9 years ago
1
unintended long variables

#30 GoogleCodeExporter closed 9 years ago
1
Add support for OpenServo modules

#29 GoogleCodeExporter opened 9 years ago
1
frozen yaw correction

#28 GoogleCodeExporter closed 9 years ago
3
Renaming the camera targeting options

#27 GoogleCodeExporter closed 9 years ago
1
Add support for 2Hz ublox

#26 GoogleCodeExporter closed 9 years ago
0
Add an NMEA parser to allow supporting a wider range of GPS types

#25 GoogleCodeExporter closed 9 years ago
2
Rework interrupt priorities and servo output

#24 GoogleCodeExporter closed 9 years ago
3
Scale controls with the airspeed

#23 GoogleCodeExporter opened 9 years ago
3
Ability to follow a moving target

#22 GoogleCodeExporter opened 9 years ago
0
Add camera chase feature

#21 GoogleCodeExporter opened 9 years ago
3
Remzibi support without UBlox

#20 GoogleCodeExporter closed 9 years ago
4
Implement circular buffer for serial link

#19 GoogleCodeExporter opened 9 years ago
5
Customizable telemetry for Remzibi OSD

#18 GoogleCodeExporter opened 9 years ago
7
Serial bootloader for UDB4, UDB5 and AUAV3

#17 GoogleCodeExporter opened 9 years ago
7
Fix Delta Wing control in 2.5

#16 GoogleCodeExporter closed 9 years ago
2
Update Documentation for MatrixPilot 2.5

#15 GoogleCodeExporter closed 9 years ago
1
Fix problems with HIL simulation

#14 GoogleCodeExporter closed 9 years ago
4
Barometric altitude sensor

#13 GoogleCodeExporter opened 9 years ago
7
Improved waypoint following

#12 GoogleCodeExporter opened 9 years ago
3
Create and use a Library

#11 GoogleCodeExporter closed 9 years ago
2
Repository Reorganization

#10 GoogleCodeExporter closed 9 years ago
7
Integrate and enhance Magnetometer Code

#9 GoogleCodeExporter closed 9 years ago
3
Create a Users Wiki page with config info

#8 GoogleCodeExporter opened 9 years ago
0
Finally create a repository of options.h files for different planes

#7 GoogleCodeExporter opened 9 years ago
1
Update the code to handle the new board

#6 GoogleCodeExporter closed 9 years ago
9
Mahoney-esque Controls

#5 GoogleCodeExporter opened 9 years ago
4
Dead Reckoning

#4 GoogleCodeExporter closed 9 years ago
2
Adjust for wind while using cross-tracking

#3 GoogleCodeExporter closed 9 years ago
2
Add more configurability to RTL mode

#2 GoogleCodeExporter closed 9 years ago
3
Implement the F_TAKEOFF flag

#1 GoogleCodeExporter closed 9 years ago
4