adrianschlatter threadlib issues

adrianschlatter / threadlib

thread library for OpenSCAD

BSD 3-Clause "New" or "Revised" License

346 stars 34 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Add threads for PG electrical thread

#90 polyfloyd opened 1 month ago
7
ignoring unknown module "nut"

#88 LarsOde closed 3 months ago
1
Tolerances / Tension if 3D printed

#87 etkaar opened 5 months ago
0
With my own thread table definition, the mesh is not closed.

#86 tomboland closed 3 months ago
1
recursion detected

#85 rolfyone closed 7 months ago
4
Example M4 profile in DesignOfThreadlib.md gives unexpected results (winding order)

#84 bobc closed 3 months ago
1
Added nut_sides parameter to allow creation of non-cylinder nut

#83 linkian209 closed 7 months ago
4
M12 nut and M12 bolt do not fit

#80 karlkashofer closed 10 months ago
12
Expanded profile docs

#79 alainchiasson opened 1 year ago
0
First try at Glass Packaging Institute threads

#78 alainchiasson opened 1 year ago
4
Extra docs - explaining thread Profiles.

#77 alainchiasson closed 1 year ago
2
Improved Profile illustration

#76 alainchiasson opened 1 year ago
0
"Comparing changes"

#75 adrianschlatter closed 1 year ago
0
Added RMS threading https://www.thorlabs.com/newgrouppage9.cfm?object…

#74 ccrome closed 1 year ago
3
Can't open library 'thread_profile.scad'.

#73 korpx closed 1 year ago
3
M10 0.9 and 1.0 Pitch for 3D printer bowden tubing coupler?

#72 ganzgustav22 closed 7 months ago
1
Error creating a thread?/

#71 mconsidine closed 2 years ago
1
Tool to create thread specs??

#70 mconsidine closed 2 years ago
1
How do I make a 1/4" lag screw?

#69 andrewmellinger closed 1 year ago
1
Add PCO-1810 thread

#68 twbaumann closed 2 years ago
2
PCO-1881 for PET bottle threads not producing workable result

#67 rlmalisz closed 2 years ago
3
Duplicates in THREAD_TABLE.scad

#66 CrashCash closed 2 years ago
2
Refactor nut to allow hex nut

#61 amadeuspzs closed 1 year ago
1
DesignOfThreadlib example

#60 yeKcim closed 2 years ago
1
link in readme

#59 yeKcim closed 2 years ago
5
Development Docs

#58 adrianschlatter closed 2 years ago
0
Missing UIS Threads

#57 adrianschlatter opened 2 years ago
0
Added clearance parameter for nut, bolt and tap + 32-UN-1 thread

#56 olivier-boesch opened 2 years ago
8
WIP: Metric Trapezoidal Thread - TR

#55 fgoebel opened 2 years ago
1
Explanation of [pitch, Rrotation, Dsupport, section_profile]

#51 ameuret closed 2 years ago
4
pass fn in call to straight_thread()

#50 Atharr closed 3 years ago
1
struggling to get a G1/2 nut fit on a G1/2 bolt

#49 kermorgant closed 3 years ago
2
fix thread size used in example

#48 jbruce12000 closed 3 years ago
1
WARNING: Ignoring unknown module 'straight_thread', in file threadlib/threadlib.scad, line 31.

#47 dennisdebel closed 3 years ago
11
fn needs to be passed in call to straight_thread()

#46 samstinson closed 3 years ago
1
FreeCAD Compatibility

#45 bvwj closed 3 years ago
1
Fix docs

#44 adrianschlatter closed 4 years ago
0
US "hardware store" threads

#43 jernst closed 4 years ago
1
Added a `tap` module to create positives for internal threads

#42 bvarner closed 4 years ago
8
Internal thread vs 'difference'

#41 sverzijl closed 4 years ago
2
creating custom thread....

#40 nohkumado closed 4 years ago
5
specifying bolt by length

#39 nohkumado closed 1 year ago
10
tapered bolt?

#38 nohkumado closed 4 years ago
3
Invalid thread name => unhelpful error message

#37 nohkumado closed 4 years ago
8
sanitized and checked desoignator validity in nut&bolt

#36 nohkumado closed 4 years ago
3
added a check to avoid adding a second -ext/-int to the thread name i…

#35 nohkumado closed 4 years ago
0
Thred for filter

#34 kakl closed 4 years ago
3
UMC-2B

#33 enriquemarquez closed 4 years ago
1
Threads Z-axis/height instead of turns

#32 yhaenggi closed 4 years ago
4
PCO-1881-int threads too thick

#31 janrg closed 4 years ago
13