juancarlostinoco ardupilot-mega issues

juancarlostinoco / ardupilot-mega

Automatically exported from code.google.com/p/ardupilot-mega

0 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Track disappears even when paused.

#572 GoogleCodeExporter closed 8 years ago
2
TCP - try to re-establish lost connection.

#571 GoogleCodeExporter closed 8 years ago
2
APM Planner - displays "disconnect" after connection is lost.

#570 GoogleCodeExporter closed 8 years ago
2
AUTO will reduce altitude until it hits terrain if ARSPD_ENABLE=1

#569 GoogleCodeExporter opened 8 years ago
7
Crash detection

#568 GoogleCodeExporter opened 8 years ago
0
MP, AC, CH6_RATE_KD tuning option does not work

#567 GoogleCodeExporter closed 8 years ago
2
Non working mode 5 selection. PWM theshold bug ?

#566 GoogleCodeExporter opened 8 years ago
4
ArduPlane Airspeed Problems since Version 2.28

#565 GoogleCodeExporter opened 8 years ago
1
Minor APM bug

#564 GoogleCodeExporter closed 8 years ago
2
AP OpticalFlow ADNS3080 initialization

#563 GoogleCodeExporter opened 8 years ago
1
APM Planner enhancement re battery warnings

#562 GoogleCodeExporter closed 8 years ago
3
1.1.52 not working/1.1.51 worked

#561 GoogleCodeExporter closed 8 years ago
4
APM Planner not remembering battery breakout board settings

#560 GoogleCodeExporter closed 8 years ago
5
CLI "Mode switch" test only works once

#559 GoogleCodeExporter opened 8 years ago
0
APM Planner log files missing waypoints

#558 GoogleCodeExporter closed 8 years ago
3
APM Planner

#557 GoogleCodeExporter closed 8 years ago
3
Arduplane does not auto land or auto take off

#556 GoogleCodeExporter opened 8 years ago
2
APM Planner not remembering settings

#555 GoogleCodeExporter closed 8 years ago
4
Save level info for airplane.

#554 GoogleCodeExporter closed 8 years ago
3
Leaning Problem APM2 (occasionally with APM1 too)

#553 GoogleCodeExporter closed 8 years ago
9
Auto mode does not do anything. (no heading towards WP)

#552 GoogleCodeExporter opened 8 years ago
12
Updated to latest MP, still shows v1.1.47

#551 GoogleCodeExporter closed 8 years ago
7
Update from MP 1.1.47 to 1.1.49 enters infinite loop.

#550 GoogleCodeExporter closed 8 years ago
3
Save-restore MAG_OFFSET values.

#549 GoogleCodeExporter opened 8 years ago
5
Polynomial linearization of thrust

#548 GoogleCodeExporter opened 8 years ago
0
Mission Planner: Flight mode interface does not works with flight mode channel set to 5

#547 GoogleCodeExporter closed 8 years ago
2
m

#546 GoogleCodeExporter closed 8 years ago
1
APM 2 red LED should come in with GPS lock, as it does with ArduCopter

#545 GoogleCodeExporter opened 8 years ago
0
Elevon Mixing not consistent between flight modes

#544 GoogleCodeExporter opened 8 years ago
1
Flight tested Arduplane 2.28 along with Skywalker Parameters, got a massive crash resulting in entire expensive equipment's loss.

#543 GoogleCodeExporter closed 8 years ago
2
Display Ampere and throttle in "flight data"

#542 GoogleCodeExporter opened 8 years ago
0
Unable to get into "console" mode

#541 GoogleCodeExporter opened 8 years ago
1
implement auto landing force sensor

#540 GoogleCodeExporter opened 8 years ago
1
CH6 tuning values not retained, messes up other values too

#539 GoogleCodeExporter closed 8 years ago
6
CH6 tuning values not retained, messes up other values too

#538 GoogleCodeExporter closed 8 years ago
1
Compass goes crazy - apparently my fixed wind aircraft is flying sideways and in reverse.

#537 GoogleCodeExporter closed 8 years ago
5
Mission Planner: Add support for H1 Swashplate Type

#536 GoogleCodeExporter closed 8 years ago
3
Mission planner aspect ratio problem

#535 GoogleCodeExporter closed 8 years ago
9
APM Mission Planner should be able to recieve UDP without the server transmitting alredy.

#534 GoogleCodeExporter closed 8 years ago
3
APM mission Planner should remember last used IP & Port for TCP connections.

#533 GoogleCodeExporter closed 8 years ago
3
Compiling arduplane 2.28 warnings- or are they "expected" ?

#532 GoogleCodeExporter closed 8 years ago
4
DO_CHANGE_SPEED in Mission Planner, speed and throttle switched

#531 GoogleCodeExporter closed 8 years ago
4
APM Mission Planner issues when run on Linux using Mono

#530 GoogleCodeExporter opened 8 years ago
19
attempt to use poisoned "SIG_USART0_RECV"

#529 GoogleCodeExporter opened 8 years ago
0
Mission Planner 1.1.43 not updating ch6 correctly

#528 GoogleCodeExporter closed 8 years ago
5
Configure dronecell (or ant GSM900 module) on boot

#527 GoogleCodeExporter opened 8 years ago
7
difficult to connect to UDP - unless connected to USB first (a strange bug)

#526 GoogleCodeExporter closed 8 years ago
23
Additional CH6 Tuning options please

#525 GoogleCodeExporter closed 8 years ago
2
Can't download logs from MP

#524 GoogleCodeExporter closed 8 years ago
7
MP: add BATTERY_EVENT to Configuration Parameters

#523 GoogleCodeExporter opened 8 years ago
0

Previous Next