issues
search
muxall
/
RPTCQ-LCD
Muxall Remote Programmable Temp Controller Model Q (for BBQ) LCD Library
MIT License
1
stars
0
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
Issue: DHCP can be set to Disabled if data coming into the controller has corrupted data.
#167
muxall
opened
3 months ago
0
Feature: Confirmation dialog for Off button in web app.
#166
muxall
opened
6 months ago
0
Issue: make a change and hit save, the change isn’t actually transmitted.
#165
muxall
opened
6 months ago
3
Feature: Soft power switch for turning power off after the cool down state.
#164
muxall
opened
1 year ago
1
Feature: High-temp Idle-down before cooldown mode
#163
muxall
opened
1 year ago
0
Documentation: Flame-On Detect Temp incorrectly says "Default is 10F"
#162
muxall
opened
1 year ago
0
Documentation: User's Manual says "Submit" instead of "Enter/Save".
#161
muxall
opened
1 year ago
0
Issue: Web App: Config tab settings are zeroed out.
#160
muxall
opened
1 year ago
0
Web App: Unchecking “Use DHCP” and clicking on “Save” with zeroed out IP info should be rejected.
#159
muxall
opened
1 year ago
0
Issue: Investigate using open wifi without a password.
#158
muxall
opened
2 years ago
0
Issue: User set meat probe types to Thermocouple Type T and the temperatures didn't zero out with no meat probes plugged in.
#157
muxall
opened
2 years ago
0
Trapezoid: Issues that need to be fixed.
#156
muxall
closed
1 year ago
5
Issue: Saving a recipe on the web app does not save Fan Speed .
#155
muxall
opened
2 years ago
0
Verify controller is switching to Min Smoke mode and not Precision Cook when VSF is engaged.
#154
muxall
opened
2 years ago
0
Feature: Add a relight option for power outages and/or flame-outs.
#153
muxall
opened
2 years ago
0
Feature: Add a second graph to monitor all meat probes.
#152
muxall
opened
2 years ago
0
Enhancement: Replace "Pause" with Flame Out and Flame On, and Chmbr Probe
#151
muxall
closed
2 years ago
1
Enhancement: Pause cook if chamber probe reads 0 degrees and outside temp is greater than 0 degrees.
#150
muxall
closed
2 years ago
2
Feature: Add ability to change background and font colors on web app.
#149
muxall
opened
2 years ago
3
Variable Fan Speed manually set to 80% then back to Auto did not reduce speed at 180F.
#148
muxall
opened
2 years ago
0
Feature: Add dynamic profiles instead of the fixed 4 profiles.
#147
muxall
opened
2 years ago
1
Feature: profiles that trigger by probe temp vs time
#146
muxall
opened
2 years ago
2
Feature: the smoke settings be moved to each profile instead one for all
#145
muxall
opened
2 years ago
1
Issue: Unable to change the Full To Empty Auger Run Time while the grill is running.
#144
muxall
closed
2 years ago
2
My controller is not remembering were the hopper level is at always have to reset it
#143
muxall
closed
2 years ago
1
Feature: Investigate replacing the OEM controller on OKJ Rider
#142
muxall
closed
2 years ago
2
Issue: Add a check to see if the grill temp is changing temp too quickly.
#141
muxall
opened
2 years ago
0
[FEATURE REQUEST] - Web UI improvements
#140
poiromaniax
opened
2 years ago
0
Issue: Auger Run Minutes is not calculated correctly after manually setting Pellets Level to a new percentage.
#139
muxall
closed
2 years ago
1
Issue: Cannot disable PHV using the checkbox in the Config tab.
#138
muxall
closed
2 years ago
1
Issue: Changing Full To Empty Auger Run Minutes did not cause Pellet Hopper Level to recalculate.
#137
muxall
closed
2 years ago
1
Issue: Changing PHV modes screws up Config tab loading.
#136
muxall
closed
2 years ago
1
Issue: User was unable to perform a Custom update to 0.603a using iPhone with IOS ver 15.02 and Safari Mobile.
#135
muxall
closed
2 years ago
1
Issue: Controller powered on for months at a time started up during a severe thunderstorm.
#134
muxall
closed
2 years ago
1
Feature: a light detector so it fires up the backlight at night
#133
muxall
opened
2 years ago
0
Feature: Add the ability to use meat probes to control the chamber temp.
#132
muxall
opened
3 years ago
0
Issue: Bernard reported the controller losing control when set at 200F and Max smoke on a Z-Grills 600x in 0.603 with VSF.
#131
muxall
closed
2 years ago
2
Issue: Changing Config-> Full To Empty Auger Run Minutes and clicking Save did not save the new minutes setting.
#130
muxall
closed
3 years ago
2
Issue: Custom PATC mode for the Z-Grills 600.
#129
muxall
closed
3 years ago
1
Issue: Slew Rate of Medium1 and slower are keeping the chamber temp above the target temp when cooking at >250 F temps. Expect them to eventually drop.
#128
muxall
opened
3 years ago
0
Issue: Shawn set refresh time from 7 seconds to 5 seconds and reports ADC resets.
#127
muxall
closed
2 years ago
1
Hardware: Increase meat probe drill hole ground plane clearance under hole properties.
#126
muxall
closed
2 years ago
1
UserManual Errors: Notes from Bob Ryan
#125
muxall
closed
2 years ago
1
Issue: so what appears to be a bug, with the new build I tried shortening profile 2 to 160 minutes, I hit enter save and start and it didn't change on the fly as it should
#124
muxall
closed
3 years ago
2
Issue: Change the fan speed in the middle of a cook then shut down the smoker. Start another cook and the fan does not start until rebooting the controller.
#123
muxall
closed
3 years ago
3
V5 Flip ESP32 on layout to support new male header boards.
#122
muxall
closed
2 years ago
1
V5 Button PCB Remove flood fill from under 3.5mm jacks.
#121
muxall
closed
2 years ago
1
Check ESP32 documentation for 50/60 Hz mains power filters.
#120
muxall
closed
3 years ago
1
websocket sending/receiving endless REGISTER
#119
muxall
closed
3 years ago
3
ChamberTargetTemp did not show +1 over outside temp with FlameOn detection enabled.
#118
muxall
closed
3 years ago
3
Next