-
The effect of the issue is to make the servos move ridiculously slow. The only solution currently available is to power down the dynamixel servos completely and restarting them.
-
Hi,
Recently, I've been during some development on a robot project that consists of 36 XM540-W270 servos. Unfortunately, I kept running into an error at startup that the dynamixel_workbench_ toolbo…
-
I have a dynamixel XL430-W250 and ran into issues compiling this package (branch: XL). Is this expected or is that branch tested with the appropriate dynamixels?
-
Hello, I am working on a project with a Bioloid robot and AX-12A Servos. I just want to ask if it is possible to use the Dynamixel SDK and the CM-530 as an intermediary to control the servos. I only h…
-
http://www.hizook.com/blog/2010/03/14/robotis-dynamixel-servos-overview-applications-tear-down-and-open-source-software
-
The [dynamixel servo server](https://github.com/uf-mil/PropaGator/tree/master/dynamixel_servo) is not in compliance with the new [actuator protocol](https://github.com/uf-mil/PropaGator/blob/master/RE…
-
Hardware: Arduino Portenta H7 + Dynamixel MKR Shield
Using 11.1v 3S Li-Po as power source, V and G measure correct on the TTL connector but running the example `scan_dynamixel` found no servos. The D…
-
ISSUE TEMPLATE ver. 1.0.0
Before you open issue, please refer to [ROBOTIS e-Manual](http://emanual.robotis.com/docs/en/software/dynamixel/dynamixel_workbench/)
1. How to setup? (ex, U2D2, OpenCR…
-
When using setGoalVelocity with unit set to UNIT_PERCENT I would expect it to be mapped to the servos max velocity. But instead the servo reaches max speed at around 21% and setGoalVelocity returns fa…
-
The Interbotix X-Series Arms are compatible with the following ROS 2 distributions and platforms:
- ROS 2 Galactic on Ubuntu Linux 20.04
- ROS 2 Humble and Rolling on Ubuntu Linux 22.04
the Gal…