-
eric@eric-ThinkPad-S2:~/crazyflie_ws$ catkin_make
Base path: /home/eric/crazyflie_ws
Source space: /home/eric/crazyflie_ws/src
Build space: /home/eric/crazyflie_ws/build
Devel space: /home/eric/cr…
-
After getting tx2 to recovery mode, I run "sudo ./flash.sh -r jetson-tx2 mmcblk0p1" and it goes like this in terminal:
"Error: Return value 8
Command tegrarcm_v2 --chip 0x18 --rcm rcm_list_signed.xm…
-
This is only bug and feature tracker, please use it
to report bugs or request features.
----
### Issue details
Hello, I am using mavros offboard mode(official code: https://dev.px4.io/v1.10/…
-
Hi,
if you change the active waypoint in Mission mode in fixed wing (not tested in copter) it will fly in a nice straight xy line to the new waypoint but will change the altitude as fast as possible …
-
----
### Issue details
Hello, I am setting up a custom UAV with a Pixhawk 2.4.8 flight computer for an experiment. This experiment requires custom RC inputs. After investigating the best method …
-
# やるべきこと
* [x] プレスリリース用 Markdownファイル作成 on GitHub
https://github.com/dronebird/docs4dronebirds/blob/master/pressrelease/pr20210625a_aerobowing.md
* [ ] プレスリリース本文たたき台作成
* [ ] 校正
* [ ] ローンチ
* [ …
-
In the path planning microservice [TRAJECTORY_REPRESENTATION_WAYPOINTS message](http://mavlink.io/en/messages/common.html#TRAJECTORY_REPRESENTATION_WAYPOINTS), there is an array of five uint16_t for M…
-
There is a cpp script for offboard control example, but it would be also helpful to provide some launchable python codes for the same example as ros2 usually supports both languages.
-
Hello,
I'm quite green in my coding skills and CS knowledge. Any assistance is appreciated.
Issue: The mavsdk code is not connecting to the AirSim drone. I assume its a combo of AirSim json sett…
-
**Describe the bug**
Drone flies perpendicular to geofence on takeoff close to geofence. The drone places a setpoint ~7 m away from launch point and tries to reach it aggressively. This is very dang…