-
Can you point out the refered paper about the impedance_controller for interia shape,thanks a lot.
-
Hi -
I have been trying to run this on some data that has a capacitive tail - so the impedance at low frequencies gets very high.
The most important features occur in the 10^3-10^5 range, but th…
-
From Bill Ashmanksas: I suppose this would be wildly controversial, but I think that Chapter 32 might be easier to follow if you introduced complex exponentials, then introduced the resistive voltage …
-
[hrpsys test is failing in testing with older hrpsys (315.1.10)](https://github.com/fkanehiro/hrpsys-base/pull/353#issuecomment-57987437). Looks like it's because [`rmfo` doesn't exist in `HrpsysConfi…
-
Some people are using high impedance AA Alkaline cells,....
-
Stephen suggested we should add links of notebooks demonstrating implementations of quantum algorithms to the quantum algorithms zoo website.
https://quantumalgorithmzoo.org/
For reference, s…
-
The controller logs show an average loop time of ~1020µS for every impedance control thread,which is slightly above the limit for the desired 1kHz frequency.
-
### Description
I have a a couple simulation models that -- under some circumstances -- fail when simulating or causes wrong simulation results.
### Steps to Reproduce
Please consider the [li…
-
### Discussed in https://github.com/AUTODIAL/AutoEIS/discussions/18
Originally posted by **tappanbr** September 17, 2023
Hello! Thank you for making AutoEis. When trying to use it, I was not a…
-
How can I configure pyEPR to assign boundary conditions other than PerfE? e,g. an Impedance Boundary