-
After taking down the enclosure at Herb03 (#134) and transporting it to Aarhus University to solve the issues they experienced with lighting and vibration (#121), we need to order supplies and constru…
-
Two new element types that you can attach to ships and to spacestations.
When they get close enough to each other, they initiate docking, and anchor the ship.
Eventually, I think they should b…
-
Overcharged docking clamps should be implemented so that, upon selection and use within the time of play, they operate properly.
--The overcharged docking clamps are powerful close range weapons, s…
-
Hi Matt
Probably obvious - but would it be possible for you to provide a photo of how to use the y-belt clamps
Thanks
Tim
-
Latest dev branch, HgiMetal finally works (yea!) but overbrights are ignored, whereas HgiGL doesn't have such issues.
-
Hi! I brought the kit from Mouser which has the SCT016-A16 CT clamps. I have plugged into the board and had to add my own 9V transformer as the kit was for 120 and I am on 240v. The voltage reads most…
-
overheadWire:
- **id**: overhead wire ID
- **substationId**: subsation ID
- **lanes**: list of lanes
- **voltageSources**: lanes with voltage: (must be part of Lanes)
- **forbiddenInnerLanes**: …
-
### The flexible shaft couplers chosen may not work in a heated chamber.
The flexible, stainless steel "bellows" center section is bonded to the end-cap clamps with some kind of adhesive.
This was not…
-
https://github.com/AllenNeuralDynamics/aind-smartspim-stitch/blob/2493c0b8759d84233346e98985e34092966270e1/code/aind_smartspim_stitch/terastitcher.py#L1005
In the neuroglancer Render tab, changing …
-
Open the KML Sandcastle example:
```
http://localhost:8080/Apps/Sandcastle/index.html?src=KML.html&label=All
```
Turn on AGI World Terrain, then zoom to "Nevada Test Site Area 26." The label is flo…