-
This project contains only the schematics. We need to also design the PCB routing.
-
Hello,
do You intend to create/publish PCB for Your project? Can I help with this?
dodo
-
Hi, can you give the pcb layout?
Or when are you planning to build other board?
-
Some components are not properly isolated - on v0.5 PCB with untented vias USB port would short out vias underneath it and the analog frontend crystal could short the traces underneath - both have con…
-
@hi!
great work, would you be interested in a PCB - i can make a fritzing file/PCB for the focuser ...
yours
wolfi
wbirk updated
5 years ago
-
- [x] platedhole
- [x] hole
- [x] via
- [ ] schematicdrawing
- [ ] silkscreen
- [ ] box (schematic)
- [ ] box (silkscreen)
- [ ] line (schematic)
- [ ] line (silkscreen)
- [ ] constrainedlayo…
-
Consider rearranging the PCB layout for TPL5010 according to manufacturer's guidance to avoid parasitic capacitance (paragraph 11.2 of http://www.ti.com/lit/ds/symlink/tpl5010.pdf)
-
Your Project looks great! Thanks so much for the effort you put into reversing the pinout and designing the PCB!
However, I'd like to modify the PCB so that the pins are routed to a 20P FPC connector…
-
Issues noted from first batch of PCBs from JLCPCB:
- Chip identifier silkscreen text missing - was it on the right layer, was the same on another layer? Might be the library.
- Could have a smaller …
-
1) I would change the PAM-42 footprint to have surface mount pads on the top layer rather than though hole. Solder wires down to those pads.
2) The footprint for the SMA connectors do not appear to h…