-
Hi, I have bought Prime 3 Haptic XR gloves.
But when I try to test the manus core - sdk2.3.0.1 by running SDKMinimalClient in Windows Visual Studio, the manus core pop up that the dongle does not ha…
-
I can't retrieve the pose of a 3D object in ROS . I have 2 computers, one with Windows 10 and one with Ubuntu 18.
The Windows PC has Motive: Tracker 2.2.0 with the following settings in Optitrack …
-
Hi,
I've recently begun using LSL, and intend to use it with an optitrack setup. I am currently using the Motive software from optitrack, and while the LSL optitrack app successfully identifies the…
-
### **Optitrack observations**
- [ ] actually we used 4 cameras → we should **increase the total number of cameras** and being sure of seeing always each marker with at least 2 camers
- [ ] #3
- […
-
Hello, I am trying to interface our optitrack system with the LSL. However, Optitrack has retired ARENA . I was guessing/hoping that the underlying technical infrastructure (IP interface etc) probably…
-
We want to use the Vicon trackers to track the physical arm so that we can measure its position. We will need to figure out how we want to add this data into our system to be recorded and visualized.
-
Hi,
currently Optitrack has updated to 3.1. Does it supports 3.1 now?
Thanks
-
- [ ] remove the current hybrid ENU NED, CHANGE IT before you get yelled at.
- [ ] body frame `HEADING_FROM_OPTITRACK` coming from natnet must be wrapped between -180 and +180.
-
## Describe the bug
We are attempting to fly in position mode with an Optitrack motion capture system as a prerequisite to flying offboard. The drone flies just fine with manual control, but when we …
-
I am currently at the Tokyo Institute of Technology setting up a lab there with LSL. Their mocap system is optitrack, which is great because as far as I know, the optitrack App was never tested. Low a…