-
### The problem
After a hard reboot i have lost sensor
sb4_0_1av_41_495_metering_active_power_feed_l1
sb4_0_1av_41_495_metering_active_power_draw_l1
### What version of Home Assistant Core has the…
-
It is not clear how to use the depth sensor inside of the simulation. The task is to find out and implement the basic functionality.
-
### The problem
Hi,
I have a problem with HA onewire setup. I have 3 locally connected DS9490 bus adapters with some DS18B20 sensors, but also one remote connected DS9490 bus with 3 other DS18B2…
-
### The problem
using the as3935 sensor component, when trying to set the div ratio values, or capacitance values, neither with change when setting in the code. When you enable tune_antenna: true it…
-
## LPC1769 Modules Used in the Project
For this project, the following modules of the LPC1769 board will be used:
1. **GPIO**: Will be used to connect a 7-segment display, which will show the co…
-
I'm sorry for the possibly stupid question. I'm new here. Is it possible to see a sample code for working with multiple sensors.
I want to use all 4 Arduino Mega serial ports
-
I tried almost everything but I couldn't get the IMU sensor to work at around ~200HZ or the 3D LiDAR sensor to work at around ~10Hz. Is there any solution?
-
Tried the new version 1.0.0 today.
It worked at first, but i renamed the sensors (_sensor.cryptoinfo_name_bitcoin_usd_1_ to _sensor.cryptoinfo_bitcoin_usd_, for example) and the sensor aren't updat…
-
I'm finally getting around to trying to setup my fan controller. I'm struggling with the dallas temp sensors, and hoping someone can help.
I have the 2.0 rev of the board with three 1-wire sensor a…
-
Hi,
The workings of the internal temperature sensors is not straightforward and I am trying to make sense of `asset_parser.json`.
```
"value_temperatura_sonda_principale": {
"path": "GET…