-
After loading bitstream (`/make.py --board=arty --load`), when serial booting (`sudo lxterm --images=images/boot.json /dev/ttyUSB1 --serial-boot --speed=1e6`) on Digilent Arty A7 OpenSBI appears to ha…
-
I am trying to run the nsh build for arty_a7 and the build is failing at the make V=1
The Log is here:
riscv64-unknown-elf-ld: /home/iisclap/riscv64-unknown-elf-toolchain-10.2.0-2020.12.8-x86_64-…
-
Hi I am working on Ibex recently and I have written a Convolutional Neural Network (CNN) in C to implement it on Ibex. First the network was very small and it worked pretty well on the core, but now …
-
Hi,
I'm using sv2v version v0.0.7-32-geae46b7.
I was trying to build ibex for arty with flow sv2v->yosys->vivado and I've encountered this issue.
SRAMInitFile is string like parameter that is pas…
-
Hello ,
We are new and we are trying to implement pulpino on Arty-A7 35t FPGA board. Can any one suggest a proper flow from generation of RTL to application development ?
We are using Vivado 2015.1…
-
This issue serves as a list of all tasks that need to be completed before an official Tock 2.0 release can be made. Please edit this list to add new tasks when they come up, or to check off tasks once…
-
I am testing your code (Nexys4-ReadFile) on digiletn arty-a7(artix-7). Using sdhc 16gb fat32.
'sdcardstate' stays forever at 1 (CMD0).
When I check the spi line in the chipscope, cs, mosi, and sck a…
-
Hi... I have been working on Ibex core for a short time and I know that Ibex is 32IMC but I tested a code to multiply two float numbers just to make sure!! Actually I used this git hub page that use I…
-
Testing the bios commands to write to SD card on Arty A7 right now, coupled with this expansion module: https://numato.com/product/micro-sd-expansion-module/. The wiring was done according to this tab…
-
Hello,
Sorry for posting my question here. I heard you were the expert in the topic which I am currently doing.
I am trying to establish openocd connection to the murax Soc (VexRiscv) core inside m…