-
https://github.com/timvideos/litex-buildenv/wiki/Bootstrap
```
juser@cnt5:~/h2u$ curl -fsS https://raw.githubusercontent.com/timvideos/litex-buildenv/master/scripts/bootstrap.sh | bash
Cloning …
-
We use `gcc-${CPU}-elf-newlib` to build MicroPython (eg, `scripts/build-micropython.sh` will install it).
It appears that the most recent conda updates for the main `gcc`, `binutils`, etc, conflict…
-
Hi,
I tested the flow on the ArtyA7 and got an issue at the moment it liftoff in linux.
Commands used :
```
git clone https://github.com/enjoy-digital/linux-on-litex-vexriscv.git
git clon…
-
The readme says to open the file `Arty-A7-35-GPIO.xpr`. There's no `xpr` file in the only release zip file, nor in the github repository itself.
-
this condition:
https://github.com/ZipCPU/openarty/blob/9fd140f016e26aab40fb1dc75812b08f01747a88/sw/board/simple_ping.c#L454
triggers when running a stress test on a Linux host:
```
sudo ping -f…
-
My intention with creating this issue is collecting/sharing information and gauging interest about running Linux on VecRiscv. From what I know, VexRiscv is still missing functionality, and it won't wo…
ghost updated
4 years ago
-
Hello Dan,
I really like your work with ZipCPU.
I was wondering what must be done to use the Arty S7 board instead of the Arty A7 or if actually it might be possible. Haven't found a section abo…
-
Hi,
I tried to add tcl a tcl script to a core to be build with Vivado. Specifically I have a build script for a Vivado IP integrator block design (created with the write_bd macro) which I want to ad…
-
Hi James,
I don't know if you are still contactable or if this project is still active, but I have posted this just in case are still interested.
I have j1b running at 80Mhz on both Spartan-6 an…
-
Fresh checkout
revision https://github.com/timvideos/litex-buildenv/commit/ddd71f41b1e4942610de5e3f6cac667a6d2dd53b doesn't work
revision https://github.com/timvideos/litex-buildenv/commit/d11f5b8…