-
By tradition VSS consider that "actuators" have two values - target-value and actual-value, this is described at https://covesa.github.io/vehicle_signal_specification/rule_set/data_entry/sensor_actuat…
-
Dear All,
I'm trying to control with actuators a `ZoneHVAC:FourPipeFanCoil` since now I was able to control the mass flow rate with the following actuator:
EnergyManagementSystem:Actuator,
…
-
The room where we are building the "Tiny House" is relatively small in terms of surface area.
If we were to have a double bed at ground-level it would occupy 50% of the floor space and not leave much…
-
In #69 , you linked to the PoE module that can output 12.95 W to the board.
This is impressive, but I believe I cannot actually draw that much power for my additional sensors/actuators, right?
C…
-
Add every sensor and actuator to the test mode so that they can be tested individually as part of the subsystem. This will aid in quick debugging in competition.
-
### Describe the bug
Metadata doesn't transfer correctly over low speed UART/TELEM links. Specifically using the CANHUBK3 FMU target **with no USB port**, when I try to enable the motor sliders Q…
-
Use Spring Actuators to retrieve information about current state of application on server, e.g. retrieve production logs.
https://docs.spring.io/spring-boot/docs/current/reference/html/production-read…
-
Here's my humanoid character: https://pastebin.com/7Ym4aqy6
Now, borrowing from the existing environment code, if I use something like
```
joint_1d_angle, joint_1d_vel = self.sys.joints[0].angl…
-
that's a feature that I like about tasmota... Big on/off buttons on the main page. For the mobile phone users.
![image](https://user-images.githubusercontent.com/33855380/35237243-64005d6e-ffaa-11e7-…
-