-
As described in the title, I followed the instructions from [https://artic.network/ncov-2019/ncov2019-it-setup.html](https://artic.network/ncov-2019/ncov2019-it-setup.html) And after entering the comm…
-
#### Arctic Version
```
Any
```
#### Arctic Store
```
ChunkStore
```
#### Platform and version
Linux
#### Description of problem and/or code sample that reproduces the issue
A…
-
I used this uart reciever andwith arty 35 and after synthesis the LUT count is 25 instead of 51 and simulation are failing post synthesis.
-
For both the Arty Z7-10 and Z7-20, the part0_pins.xml files both have incorrect assignments for IO10 and CK_SS.
F16 is CK_SS, and T16 is IO10, according to XDC file and schematic.
F16 is IO10, and T…
-
Can we have support for synthesising necessary files for the 100t variant of digilent arty kit?
-
the issue metioned on:
https://github.com/litex-hub/linux-on-litex-rocket/issues/40#issue-2324887509
i found the arty.dts had a node with interrupts-extended:
```
L1: interrupt-controller@c0000…
-
I am using Vivado and Vitis 2024 with an Arty Z7-20 board.
When I run the second or third steps of the single cycle implementation, I get 1 fetched and decoded instructions instead of 14. I saw one…
-
I have a Digilent Arty Z7 - should this work on it without changes?
-
Hi all,
I've encountered the following error when trying to run the pipeline:
> Project `BCCDC-PHL/mpxv-artic-nf` is currently stuck on revision: main -- you need to explicitly specify a revisio…
-
Compound articulations should not be both be placed in a single staff space. And tenutos should definitely *not* be placed on staff lines :-)
Example of current `ten-stacc` placements:
Corr…