-
### The problem
Hello,
esphome on 1st gen dual core ESP 32 (board: esp32dev)
component mcp2515 is not receiving any can messages with extended id.
Transmitted can messages with extended id a…
-
### The problem
# Problem
I can't get canbus/twai to run regularly.
When I connect an oscilloscope I cannot read RX and TX signals of the microcontroller from GPIO22/23. Only after I set the fra…
-
Hi,
I'm testing canbus using DUE and transceiver sn65hvd230 shield.
I have a canbus network as follows;
CANBUS NETWORK:
- 2 arduinos NANO with MCP2515
- 1 arduino MEGA 2560 with MCP2515
- 1 a…
-
After #2 is completed, design and document the CANbus specification for QEV3
- [ ] Decide board ID's
- [ ] Establish each board's output message format
- [ ] ChassisController
- [ ] AM…
-
# version
Build information:
version 7.4.5
PySide6 6.6.0
CPython 3.12.4 x64
# Description
I have a record file that contains canbus errors (just temporary short H and L), from the GUI I can …
-
Working well with a bluetooth OBD2 adapter, but looking to see if it is able to read from a network can device (http://copperhilltech.com/pican-2-can-interface-for-raspberry-pi-2-3/).
I feel like I…
-
Hi There,
thanks for designing this. Is there a chance to get the CAD files for it?
Would like to add Canbus mount and Filament sensor
TIA
Obs
-
hey there,
I am using the ESP32 internal CAN Controller (https://esphome.io/components/canbus.html?highlight=can#esp32-can-component).
could you also "elegantly integrate" a variant for this?
…
-
What a fantastic node!
I'm really asking about components not listed on your readme.
For example I'm personally interested in: https://esphome.io/components/canbus.html
Is there a way to send…
-
Referencing docs at https://docs.arduino.cc/tutorials/uno-r4-minima/can from @karlsoderby
See comments in https://forum.arduino.cc/t/using-can-with-minima-r4/1162333/4.
Three different people h…
jlit updated
10 months ago