-
[962/969] Building C object esp-idf/main/CMakeFiles/__idf_main.dir/wifi.c.obj
FAILED: esp-idf/main/CMakeFiles/__idf_main.dir/wifi.c.obj
/home/hassanahmedansari/.espressif/tools/xtensa-esp-elf/esp-13…
-
Хочу сделать швейную машинку для вышивания..
как подключить (датчик индуктивности или датчик холла )для установки поднятия иглы ? и прописать его в прошивке
чтоб по команде в gcode m555 двигат…
-
I compiled the program and flashed it, according to the logs, it is clear that it connects to Wi-Fi, but an error is generated and it spams it consecutively:
```
[0;32mI (31) boot: ESP-IDF v5.3 2nd…
-
I'll try my best to explain this, the beta firmware you've provided, unless I've missed something, doesn't have the BigTreeTech 32 bit SKR V2.0 board, so I had to download the newest 2.0.9.2 marlin fi…
-
Removing the Help on V2 Saves
V2 As is | 1,029,389.00 |
-- | -- | --
V2 No help | 1,016,301.00 |
| (13,088.00) | (12.78) KiB
Strings Left are - @dagar - I thould we have errno set to n…
-
Regarding the steps for releaving a booting process loop, when removing the 3-4 pin after the hikey_idt config command when specifically should i power cycle the device? I have tried a few different w…
-
Hi there,
I just got a Sequre S99, which seems to be very similar to the S60P in terms of hardware.
As @Ralim mentioned in a discussion [here](https://github.com/Ralim/IronOS/discussions/1919), we …
-
### Creating a bug report/issue
#### Required Information
- DietPi version | `cat /boot/dietpi/.version`
- Unable to verify
-
- Distro version | `echo $G_DISTRO_NAME $G_RASPBIAN`
- Unable to …
-
when i try to make command with bdsensor installed it gives "Too many message ids
make: *** [Makefile:84: out/compile_time_request.o] Error 255"
Here is the full log:
pi@mainsail:~/klipper $ ma…
-
I was able to attach my PandaPi to my Openbeam Kossel Pro, and all that's left is configuration. However, whenever I run G33, it consistently errors out with either "homing failed" (if I don't home fi…