-
### Describe the bug
In MANUAL ELEC mode, when pushing DC TIE 1 button, BAT shows white on SYNOPTIC page
### Steps to reproduce
Ground
BAT ON
Ground PWR ON
ELEC SYS MANUAL
DC TIE 1 OPEN
### Ex…
-
### Describe the bug
-
### Expected behaviour
Hope this would be updated since spawning in the plane with no weights loaded the containers inside the cargo hole is still visible. Can they removed b…
-
### Describe the bug
Winglet and tail fin static dischargers missing
### Expected behaviour
To have two static dischargers on the top side of the winglet and two static dischargers on the ta…
-
### Describe the bug
DIRECT TO dashed magenta line/arcs missing
### Expected behaviour
Before inserting the direct to a dashed magenta line/arc should appear on the ND to the selected waypoint
#…
-
### Describe the bug
In MANUAL ELEC mode, when pushing AC TIE 3 button, FOs DUs remain operational
### Steps to reproduce
Ground
BAT ON
Ground PWR ON
ELEC SYS MANUAL
AC TIE 3 OPEN
### Expected…
-
### Describe the bug
The idle power on the PW engines are too high.
### Steps to reproduce
Start the engines and keep the throttle in the idle position.
### Expected behaviour
The PW4462 engines …
-
### Describe the bug
>400ft agl, if using manual thrust and you hit the PROF button, the autothrottle should engage but it does not.
### Steps to reproduce
Takeoff with manual thrust (autothrottle …
-
### Describe the bug
With APU running and APU AIR on, the N1 speed is 50%, N2 speed 100%
### Steps to reproduce
see descrip
### Expected behaviour
S/B with APU AIR on, the N1 speed should be vari…
-
### Describe the bug
Gear handle retraction/extension sound too loud
### Steps to reproduce
Move gear handle
### Expected behaviour
Instead of 717 which is quite loud it should be a lot quiter …
-
### Describe the bug
Unable to select new approach after touch and go
### Steps to reproduce
Load in an approach, touch and go, enter holding patern, enter an approach in FMS nothing happens…