-
Many many thanks for the plugin.
I have an issue, probably because I install and reinstall it. The variables 1hr, 3hr, 6hr, ... has a null value.
I reinstall again and the first error at the serve…
-
- [ ] Add thermal cutout around barometer, move away from heat sources
The current barometer is too sensitive to soldering and isopropyl alcohol, maybe another will be better
- [ ] Investigate s…
-
**Hello everyone, I am a staff member of GEPRC. Long ago, we found that there is no integrated barometer in the FC launched by some brands, which has no impact on the firmware of Betaflight. However, …
-
This issue is to log the process of integrating our blimps with Buzzstation.
So far we have done the following:
- [x] Verify Buzzstation working for manual blimps control on the new microROS-free …
-
### Describe the bug
in src/drivers/barometer/goertek/spl06/SPL06_SPI.cpp
in SPL06_SPI::read(uint8_t addr, uint8_t *buf, uint8_t len) there is only an transfer() call ,which doesn't remove the inva…
-
Things related to:
- IMU
- Barometer
- Voltage
- Current
- Battery Status
-
**Describe the bug**
Ms5611 is detected and gives appropriate pressure value. I have implemented it from HukeIOT repository. But it seems that the drone still uses velocity based altitude/height hold …
-
Bug report
Issue details
I am experiencing an issue with the configuration of my flight controller and RTK system. The copter only arms in Stabilize mode and fails to switch to other flight modes …
-
### Description
I have an app that uses the barometer and initializes it upon app startup. On iOS 17.4, calling Barometer.Start() results a hang. Using the debugger, we can see the exception thrown…
-
Hi all,
I'm very new to SCHISM. I'm trying to run a simulation of Tropical Cyclone Ita in Queensland, Australia. I'm also using WWMIII. The model ran, and the air_pressure and significant wave hei…