-
I built the acorn.py for both the CLE-215 and the Alientek board,
and I get in both cases the same symptoms:
```
$ litex_server --jtag --jtag-config ft232.cfg
Open On-Chip Debugger 0.12.0
Lice…
-
Hi, @Dolu1990
I'm using litex with your naxriscv and trying to figure out how I can integrate my IP with your code. My ip uses axi4
and it has:
> (1) an AXI4 master and a slave port;
(2) the m…
-
When mounted in Acorn Mini baseboard and for now will probably only work when with Ethernet (PCie will require changes).
Should be almost identical to: https://github.com/litex-hub/litex-boards/blo…
-
Hi,dear dolu,
I am currently learning how to use the kernel generated by Litex to run the dhrystone algorithm on SOC. The specific operation is: 1. Generate a SOC system with a Nax core, and then bas…
-
When I try to build for example litex_boards/targets/linsn_rv901t.py with --with-ethernet, but add ntxslots=1 to the add_ethernet line, build fails with:
> Traceback (most recent call last):
> F…
-
In order to obtain a reproducible LiteX environment, the creation of a Vagrant file would be interesting.
This would automatically create a virtual machine with everything you need to get started b…
-
I am trying to run
```bash
./make.py --board=arty --cpu-count=1 --load
```
and I am currently getting an error below, relating to my USB connection.
```bash
Error: unable to open ftdi devi…
-
When trying to flash firmware to SPI Flash geting with command:
`./limesdr_xtrx.py --with-bscan --board=limesdr --build --flash-boot --flash --cable ft2232`
I am getting:
`litex.build.generic_p…
-
Hello,
I am experiencing an issue when running the console with the CVA5 CPU using the script .`/litex_sim.py --cpu-type cva5 --with-sdram`. The console consistently freezes after typing just a few…
-
Hi!
We are working on getting the panologic-g2 into the [`timvideos/litex-buildenv`](https://github.com/timvideos/litex-buildenv/pull/223) repository and [`litex-hub/linux-on-litex-vexriscv`](https…