AndrewEllis93 Pressure_Linear_Advance_Tool issues

AndrewEllis93 / Pressure_Linear_Advance_Tool

Pressure Advance / Linear Advance Calibration Tool

https://ellis3dp.com/Print-Tuning-Guide/articles/pressure_linear_advance/introduction.html

GNU General Public License v3.0

40 stars 21 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Save/Export settings as json

#45 taos15 opened 2 weeks ago
0
Doesn;t work on RRF

#44 velkhor opened 2 months ago
0
Error in RRF M572 generation

#43 TypQxQ opened 2 months ago
3
G code shows weird bed size on and wont print

#42 blank-boop opened 3 months ago
0
Line width issue in PA testing

#41 zhangrui1114 opened 4 months ago
0
Add klipper EXCLUDE_OBJECT to enable adaptive bed meshing

#40 kageurufu opened 4 months ago
1
Tooltip icon not visible

#39 alber70g opened 5 months ago
0
RRF nozzle crashes into bed

#38 RoccoFL closed 8 months ago
1
Spanish localization issue

#37 Aibehn opened 8 months ago
1
When trying to print on a Voron Trident 300, all of the bed sizes fail with - '!! Move out of range: 0.000 5.000 0.585 [0.000]'

#36 j-collom closed 8 months ago
2
Fix regex to catch PS placeholder for Hotend

#35 julianschill closed 9 months ago
1
Initial implementation of exclude_objects to support KAMP

#34 Squid116 opened 10 months ago
2
Unwanted "]" on Start Gcode klipper on pressure advance calibration tool (web)

#33 Mac-EvoyING closed 9 months ago
1
increment smooth time instead issue

#32 llecardu closed 9 months ago
1
Ehm, dangerous tool... It does not accept z_offset

#31 tomdelahaba opened 11 months ago
1
Expand range for Marlin Direct Drive.

#30 mmm7 opened 1 year ago
1
Add object labeling (support KAMP)

#29 ronpandolfi opened 1 year ago
5
Lowering Square Corner Velocity for easier spotting of right PA value

#28 MartijnGevaert opened 1 year ago
0
Range in Filename

#27 hiltonjanfield opened 1 year ago
0
Save Settings for Multiple Printers

#26 hiltonjanfield opened 1 year ago
0
Extra length on restart

#25 Gallion opened 1 year ago
0
Doesn't support centered origin

#24 Megamannen opened 1 year ago
1
Layer Count does not work

#23 Paul-Damian closed 9 months ago
3
Move out of bounds (klipper)

#22 MidweekMouse505 closed 1 year ago
2
Save/Load settings from a file

#21 richardjm opened 1 year ago
2
Add an options to enable Label Objects

#20 lucascarvalho opened 1 year ago
5
Can't set End K value higher than 0.2

#19 2probro opened 1 year ago
8
Settings are not written to the GCODE

#18 xenon2008 opened 1 year ago
1
Option to add Skirt or Purge Line

#17 Kalpar opened 1 year ago
0
Don't Add G28 doesn't work

#16 Serbitor opened 1 year ago
1
PA pattern not complete in cura

#15 HTMOTS closed 1 year ago
1
Klipper smooth time max is 0.2 - might be good to have a note or something

#14 PhilBaz closed 1 year ago
1
Advanced feature to not require G28, M190 and M109

#13 UnPure closed 1 year ago
0
End-Macro definition doesn't find his way to the export-file

#12 DaLimboster closed 1 year ago
1
Selectable Z zero location

#11 hoverdj closed 1 year ago
3
Saving settings to browser is not working

#10 AndrewEllis93 closed 1 year ago
0
PRINT_START macro is not regarded in gcode file

#9 sddev0 closed 1 year ago
3
Remove redundancy from form/settings logic

#8 mjonuschat closed 1 year ago
0
start/end macros don't match klipper default names or parameters

#7 strayr closed 1 year ago
2
Retraction settings lack Unretract distance setting

#6 oliof opened 1 year ago
0
allow firmware retraction

#5 oliof closed 1 year ago
1
Minor adjustments for Deltas.

#4 Foxies-CSTL closed 1 year ago
3
Add RepRapFirmware Support

#3 jaysuk closed 1 year ago
0
add rrf3 option

#2 Alex9779 closed 1 year ago
33
Bugfix: Non-first layer fan speed should use FAN_SPEED

#1 sree314 closed 1 year ago
1