ELynx ddf-350-modding issues

ELynx / ddf-350-modding

My mods for DumboRC DDF-350 RC remote firmware(s)

GNU General Public License v3.0

9 stars 1 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Update main page to 1.1.5 situation

#21 ELynx closed 1 week ago
0
Porting to 1.1.5 progress

#20 ELynx opened 1 month ago
7
Sharp step output, usage case boat reverse flap

#19 ELynx opened 1 month ago
0
Allow full range values for throttle and steering curves

#18 ELynx opened 1 month ago
0
Better color scheme for main screen

#17 ELynx opened 1 month ago
2
Beta 0.6.x known issues and improvements -> release

#16 ELynx closed 1 month ago
1
Swap remote and local voltages

#15 ELynx opened 1 month ago
2
White noise mode for screen de-burning

#14 ELynx opened 2 months ago
0
With quick ProgMIX mod, throttle priming turns both progmixes on if k1 and k2 are the same

#13 ELynx closed 1 month ago
1
Port to 1.1.3

#12 ELynx closed 1 month ago
0
Porting to 1.1.3

#11 ELynx closed 1 month ago
1
Toggle between absolute and percentage volume on main screen

#10 ELynx opened 3 months ago
0
Model quick setting via control / without menu dive

#9 Up50lut3 opened 3 months ago
7
Voltage return has low-voltage alarm function

#8 howard520 opened 3 months ago
1
Release 0.0.4

#7 ELynx closed 3 months ago
0
Allow voltage threshold alarm values below 4.1 volts OR set lowest NiMh voltage to 4.0 volts

#6 ELynx closed 2 months ago
2
4WS rear drop out

#5 jgillilan closed 3 months ago
5
Feature request: 4 NiMh voltage definition

#4 hicwic closed 3 months ago
14
Program MIX - EPA mode

#3 ELynx closed 2 months ago
4
Answer to https://github.com/82munk

#2 ELynx closed 4 months ago
7
Program MIX - Multiplication mode

#1 dhilung closed 3 months ago
6