Zapit-Optostim zapit issues

Zapit-Optostim / zapit

General purpose optostimulation system

GNU Lesser General Public License v2.1

6 stars 1 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

DIO to masking light for flexibility

#158 raacampbell opened 1 month ago
0
Log file should save to default location when logging is enabled

#157 raacampbell opened 4 months ago
0
Can we run stopOptoStim via a callback function linked to descending TTL?

#156 raacampbell opened 4 months ago
0
Take images of point locations

#155 raacampbell opened 4 months ago
0
Option to disconnect camera

#154 raacampbell opened 4 months ago
0
Config generator: Tile brain area with points

#153 raacampbell opened 4 months ago
0
Parameters in stimulus configuration GUI affect all stimulus locations

#152 raacampbell opened 5 months ago
0
Should we link to brainglobe and create the ability to add arbitrary atlases?

#151 raacampbell opened 5 months ago
0
Fixed duration stimuli with a large number of stimulus points leads to an error

#150 raacampbell opened 5 months ago
1
Rampdown might possibly be starting one cycle too soon

#149 raacampbell opened 5 months ago
4
Remove meaningless volts per pixel setting

#148 raacampbell opened 7 months ago
0
Can we make a focusing tool that will scan the beam back forth over a blade edge and look at slope?

#147 raacampbell opened 7 months ago
0
Stimulus config editor should have better approaches for handling multi-point stimulation

#146 raacampbell opened 8 months ago
0
Plot stimuli waveform does not show the correct level for the laser

#145 raacampbell opened 8 months ago
0
Modify pattern generator to make patterns of multiple points in a single trial

#144 raacampbell opened 8 months ago
0
maxStimPointsPerCondition does not do much

#143 raacampbell closed 1 month ago
1
It should be clear that stimulation power refers to time-averaged power.

#142 raacampbell closed 8 months ago
1
Abstract DAQ call in stopOptoStim

#141 raacampbell closed 8 months ago
1
Loading a file in stim config maker causes it to just close

#140 raacampbell opened 8 months ago
2
There may be circumstances where the stimulated points are flipped compared to what is on the screen

#139 raacampbell closed 8 months ago
1
Allow system to produce arbitrary number of points in a trial

#138 raacampbell opened 8 months ago
4
Fail gracefully if instrument control toolbox is missing

#137 raacampbell closed 8 months ago
1
Double-check that the fixed duration rampdown looks right

#136 raacampbell opened 10 months ago
0
sendSamples blocking behavior with finite samples causes the TCP/IP client to block also

#135 raacampbell closed 10 months ago
3
stimConfig.laserPowerFromTrial should not be affected by stim freq

#134 raacampbell closed 8 months ago
1
Make it possible to present stimuli of pre-defined length

#133 raacampbell closed 10 months ago
0
Loading a stimulus config at the CLI does not update the GUI text

#132 raacampbell opened 11 months ago
0
Confirm the Zapit state (e.g. Idle) is being updated as expected

#131 raacampbell opened 11 months ago
1
Sending samples again whilst Zapit is waiting to present will result in an error

#130 raacampbell opened 11 months ago
1
Pull request for dev ranch to integrate new message handling structure for TCP/IP bridge

#129 Peter-Vincent closed 1 year ago
1
Create new stim set with two uni points only. Zap all points fails.

#128 raacampbell closed 8 months ago
1
Newly downloaded from FEX but reports that a new version is available

#127 raacampbell closed 1 year ago
2
Camera frame update can hog MATLAB and massively slow down some stuff

#126 raacampbell opened 1 year ago
4
Changing the tcp-ip communication protocol

#125 Peter-Vincent closed 1 year ago
5
Simulated mode does not start in R2020a

#124 raacampbell opened 1 year ago
3
If a stimConfig file is loaded at the CLI, this is not reported in the GUI

#123 raacampbell opened 1 year ago
0
New "state" property may not reflect state correctly

#122 raacampbell opened 1 year ago
0
Should we add real-time control to the API?

#121 raacampbell opened 1 year ago
0
Consider whether we should add an image reg step to maintain head pos between sessions

#120 raacampbell opened 1 year ago
0
Add TCP/IP comms so a different PC can communicate with Zapit

#119 raacampbell closed 11 months ago
0
moveBeamXY is great but we want this in mm too

#118 raacampbell closed 1 year ago
1
Get rid of calibrateScanners.calibration_power_mW

#117 raacampbell opened 1 year ago
0
Measure scanner calib accuracy and plot nicely

#116 raacampbell opened 1 year ago
1
The term "Duty cycle" is not use correctly in the settings

#115 raacampbell closed 1 year ago
1
Add option to record from AI lines during trials

#114 raacampbell opened 1 year ago
1
There seems to be an issue with offsets L/R

#113 raacampbell closed 1 year ago
4
Overlay barrel centres onto Allen map

#112 raacampbell opened 1 year ago
0
Incorporate scanner lag parameters and document them

#111 raacampbell opened 1 year ago
0
Add option for ephys-friendly waveforms

#110 raacampbell opened 1 year ago
3
Add zapit version to experiment log files

#109 raacampbell closed 1 year ago
1