-
Hi! First, thanks for your work here!
For the past two month, I've working on rewriting rust mavlink code generator because I found some bugs in the current version of mavlink-bindgen. I definitely…
-
With Mario AIO cam there is no telemetry possible, neither on UART0 nor on UART2. I've tested with several baud rates. Settings:
- Telemetry MAVLINK
- any FC sys ID allowed
- refresh rate 4 Hz
- …
-
### Issue details
I want to parse mavlink messages in mavros source code
```
mavros/src/lib/mavros.cpp
```
For example:
```
mavlink_manual_control_t
````
And then get some value:
```
pa…
-
I have noticed that the original `STATUSTEXT` message has been replaced by the mavlink event interface in the PX4 and QGroundcontrol latest version. See:
https://mavlink.io/en/services/events.htm…
-
Publish the vessel pose (GLOBAL_POSITION_INT, ATTITUDE) via MAVLink, using a different system id (e.g., 2).
I believe that QGC will display and log it.
-
Follow up to #11596.
The initial MAVLink Signing implementation supports basic setting of a user provided secret key and sending the setup_signing message to enable/disable signing. Necessary improve…
-
Hi everyone,
I’m working on configuring an iNav-based flight controller for my drone and aiming to control its movement using a Raspberry Pi with the pymavlink library. I’ve already connected the R…
-
### Describe the bug
When I configure a port for mavlink telemetry output nothing comes out. I also tried to enable the telemetry mode, that did not work either.
### To Reproduce
put an oscilloscop…
-
## Bug report
I cannot demonstrate with 100.00% certainty that what I'm reporting is indeed a bug in ArduPilot and not a bug in my code, but having spend lots of efforts on the issue makes me think…
-
There are compilation warnings on master due to missing `storm32` feature.
The code-gen generates a `storm32` cfg attribute, since this dialect is described in the mavlink message definitions, howe…