-
Battery voltage sensor seems to be providing invalid data for traction battery. The voltage is way lower than what is shown via OBD (e.g. now at 82% SoC OBD says 426V, this sensor shows 340V in HA) an…
-
### Robot Model
Select One
### ROS distro
Select One
### Networking Configuration
Select One
### OS
Select One
### Built from source or installed?
Select One
### Package version
Installed b…
-
There's a bunch of rockets that we can't fly entirely correctly with PEG or autostaging because they need special things to happen which violating the "simple" Kerbal-style autostaging rules. For exa…
-
Hi... Me... again :)
I installed all your code succesfully into an ESP8266, Home Assistant finds it and show all data. The ESP8266 is wired correctly to a MAX232 In TTL and the side of RS232 is cor…
-
No CANBUS reading from Wideband to Rusefi ECU.
Using original release wideband firmware canbus wideband values are received fine but sensor eventually times out on goes into error.
Using second rel…
-
Ubuntu 22.04, ROS2 Humble, Gazebo Sim, version 7.7.0.
The `iris_runway.launch.py` or the `maze` dont even start whereas the `wildthumper_playpen` shows something in gazebo although there are error…
-
**Original report ([archived issue](https://osrf-migration.github.io/ignition-gh-pages/#!/ignitionrobotics/ign-cmake/issues/40)) by Anonymous.**
----------------------------------------
I have been t…
-
**Original report ([archived issue](https://osrf-migration.github.io/haptix-gh-pages/#!/osrf/handsim/issues/90)) by John Hsu (Bitbucket: [hsu](https://bitbucket.org/%7B0a186eae-abf0-4514-a951-23db5ecc…
-
I run the command make "px4_sitl jmavsim", it failing and giving below error I tried all solution on the internet nothing worked.
-
#### Summary
Support Gazebo simulation embedded in the WB-Toolbox block, communicating over standard YARP C++ device interfaces.
#### Motivation
Users will just need to press play to launch a…