-
Small issue... The schematic has the pinout for the Pmod wrong. A surprising claim for the sloppiest [standard](http://digilentinc.com/Pmods/Digilent-Pmod_%20Interface_Specification.pdf) I've ever se…
-
Just found out about this gem and in all fairness I was surprised it did not get more attention, it looks really good. I have been through the FAQ but I wanted to clear some things up.
- Has `pmod` …
-
hola! no entiendo porque con la linea destacada con rosado puedo concluir lo destacado con amarillo
![SmartSelect_20240706_200740_Samsung Notes](https://github.com/IIC1253/IIC1253-2024-1/assets/10656…
-
I am looking forward to the kickstarter. Similar to ULX4M-CM4-HAT, I want to test the ULX4M / CM4 IO board combination with the RPI PMOD Hat at [https://github.com/fm4dd/pmod2rpi](https://github.com/…
fm4dd updated
2 years ago
-
Hi, I am new to SNMP and want to create a SNMP Trap Receiver.
I found following code for Trap Receiver but not sure where and how to add snmpv3 user in following code snippet.
kindly help.
code f…
-
There are quite a few Ethernet MAC cores, but mostly in Verilog. I've a project written in VHDL, use GHDL, and therefore looked for a core written in VHDL, and found this project.
The core was tested…
-
On the ULX3S we have 'slow' USB 1.1 host. With this PMOD it should be possible to have USB2.0 at 480Mbit/s
Are there any examples for this USB board? Can the ULPI be used as a replacement PHY in othe…
-
- [ ] Add default namespaces to terminology service
- [ ] Add equivalents for the following GO terms that Charlie listed to the DEFAULT namespaces for pmod
- [ ] Add a entity types for the DEFAULT nam…
-
The correct numbering must be
```
#set_property -dict { PACKAGE_PIN E15 IOSTANDARD LVCMOS33 } [get_ports { jb[1] }];
#set_property -dict { PACKAGE_PIN E16 IOSTANDARD LVCMOS33 } [get_ports { …
-
I am going to port CVA6 to the VCU118 board. I have synthesized the FPGA code for the VCU118 and used the PMOD micro SD card adapter from Digilent. However, I observed that Linux gets stuck at a certa…