-
Is it possible to use a Servo motor such as MG995 modified to continuous rotate? How should be the connection for Up and Down pins?
-
## Current Behavior
If Continuous Servo Trim is enabled on fixed wings, it is constantly trimming even when not flying level or when flying slow or fast maneuvers. This leads to a few seconds of stro…
-
This library is simply spetacular! If we could make it work with continuous rotation RC servos, without any additional hardware, it would be a dream coming true...
Also, what about using this libra…
-
### Description
I'm testing moveit servo with the actual Ur5e robot. The robot moves smooth when providing continuous constant velocity using the original URDF provided by Universal Robots (Velocit…
-
After _much_ discussion (in #248 ), a minimal-version of a Servo class was added in release v1.3.0 of GpioZero.
However it doesn't include **everything** that people had been asking for, so this is a…
lurch updated
6 years ago
-
The XL-320s have a limited rotational range which sometimes limits our ability to do things. The XC430 doesn't cost much more and provides higher torque, stronger body, and continuous rotation modes. …
-
hello,
i am using grbl version 0.9 to make a cnc plotter with 2 steppers and 1 servo. the servo is connected to pin d11 of arduino uno. the servo is not working at all only a buzz like sound comes so…
-
`set_position` generally works really well, but occasionally the robot seems to completely ignore a command: it won't throw any errors that we can see, but it also won't move. This only happens with t…
-
### Describe the bug
Little Story:
Imagine you are flying a Fixed Wing in Manual mode and lose RC signal. When the RC signal lost failsafe is set to "disarmed", but the prearm mode is set to "alwa…
-
I have some strong power nema17 stepper and bldc hub motor from hover board. Its possible way to connect?