-
**TMotor/Pacer F7**
Please provide the target name. e.g. `TMOTORPACERF7`
Please provide vendor and model of the FC. e.g. `TMotor Pacer F7 F722 Flight Controller`
Please provide a lint to the vendor…
-
### Issue details
The MAVROS2 node takes a very long time to fully boot with all plugins. There are no other intensive processes running in my machine (need to run alongside PX4 SITL, but it's not …
-
**Describe the bug**
Did a clean flash, full chip erase, a few times, rolled back to Betaflight and flashed emu back.
Same thing.
It shows two UART1 on Configurator and if you try to assign anythin…
mdrjr updated
2 years ago
-
I can not use iris drone in PX4 SITL on offboard mode.
I have a code written with python using mavros to control iris drone in offboard mode. But when I set, command the mode to offboard drone does n…
O2KAN updated
2 years ago
-
Good morning,
I have the VL530L0/1XV2 laser rangefinder sensor wired up per the directions on https://clover.coex.tech/en/laser.html
The particular model I am using is this: https://www.amazon…
-
**Describe the bug**
PixRacer doesn´t recognise UAVCAN devices like HereFlow
various devices work perfect with X2.1-777 (e.g. HereFlow as range and flow on id 125)
**To Reproduce**
Steps to repr…
-
- [x] 3dr_radio
- [x] adsb
- [x] cam_imu_sync
- [x] companion_process_status
- [x] debug_value
- [x] distance_sensor
- [x] esc_status
- [x] fake_gps
- [x] gps_rtk
- [x] gps_status
- [x] hil
…
vooon updated
2 years ago
-
-
Hey Guys,
I recently shifted from betaflight to inav as it has more compatible features like ALTHOLD and POSHOLD that I'm looking for my current project. I'm currently using HOBBYWING F4 G3 flight co…
-
## Enhancement request
**Issue details**
Comments added by @rmackay9:
Copter-4.0.3 (and master) do not support multiple Maxbotix sonar. We should enhance AP_RangeFinder.cpp so that it passes i…