issues
search
bandasaikrishna
/
Autonomous_Mobile_Robot
Autonomous mobile robot navigation using ROS Navigation Stack.
170
stars
73
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
I2C can't read error
#14
Abishakinbanathan
opened
8 months ago
0
Hello Dear Sai
#13
hemsinghb
opened
1 year ago
0
can not move it properly using teleop keyboard + the robot in Rviz keeps spinning
#12
sudoNass
opened
1 year ago
0
Errors in I2C slaves 0x08 and 0x09 on Raspberry Pi and Arduino Nano V3
#11
robotos2023
opened
1 year ago
1
rviz robot model not moving
#10
gndeepan
closed
2 years ago
0
I am gettig below errros while running controller_check.launch. i2c slaves 0x08 and 0x09 were detected on Rpi and Im using raspberry pi 4
#9
gndeepan
closed
2 years ago
3
Change in wheel and motor rpm
#8
niranjan1997
opened
2 years ago
1
Few questions from your existing setup
#7
Arvrairobo
opened
2 years ago
1
Navigation without encoder
#6
mehmetaksu2034
closed
3 years ago
3
Remote I/O error. Failed to write to I2C Slave 0x8 @ [write_byte():write 121], Could not read from I2C slave 0x8, [read_byte():read 121]
#5
vijaybande
closed
3 years ago
8
Issues in case of controller_check.launch
#4
vijaybande
closed
3 years ago
4
Issues with move_base with personal robot, following recommended steps
#3
derektan95
opened
3 years ago
0
Error while catkin_make
#2
PhamGiaKhanh
opened
3 years ago
1
Updated Readme with links , images and basic info
#1
0xraks
closed
3 years ago
0