juancarlostinoco ardupilot-mega issues

juancarlostinoco / ardupilot-mega

Automatically exported from code.google.com/p/ardupilot-mega

0 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

piezo buzzer not working

#722 GoogleCodeExporter opened 8 years ago
0
Bug report

#721 GoogleCodeExporter closed 8 years ago
1
Ability to select either UART0 or UART2 from the mission planner for telemetry.

#720 GoogleCodeExporter opened 8 years ago
3
Quick screen data on mission planner 1.2.7 mav.1.0

#719 GoogleCodeExporter closed 8 years ago
1
RCX_MIN values for aux channels never get stored or overwritten with 0 in ArduPlane rev cb25c7e7c4b3

#718 GoogleCodeExporter opened 8 years ago
4
NEW parameter START_VOLT

#717 GoogleCodeExporter opened 8 years ago
0
Mission Planner 1.2.7 - units description revision (not urgent)

#716 GoogleCodeExporter opened 8 years ago
1
mission planner xtrack & airspeed_use parameters errors

#715 GoogleCodeExporter opened 8 years ago
1
Wrong GPS coordinates when using plain NMEA module

#714 GoogleCodeExporter opened 8 years ago
0
mjpeg_streamer in Mission Planner

#713 GoogleCodeExporter opened 8 years ago
7
not urgent but a small correction

#712 GoogleCodeExporter closed 8 years ago
2
Flight Planner features not working

#711 GoogleCodeExporter closed 8 years ago
2
algorithm of passing waypoints

#710 GoogleCodeExporter opened 8 years ago
3
2.4: FBW_A and Stabilize Don't Agree on where Level Is

#709 GoogleCodeExporter opened 8 years ago
2
Small corrections to the Mission Planner

#708 GoogleCodeExporter closed 8 years ago
2
Setting a new time based loiter waypoints via right-click in flight planner causes an error

#707 GoogleCodeExporter closed 8 years ago
2
Verify sketch ArduCopter.pde in Arduino 1.0 fails with AP_Int16

#706 GoogleCodeExporter closed 8 years ago
8
Arducopter not compile: g.rc_9, g.rc_10, g.rc_11 does not exist.

#705 GoogleCodeExporter opened 8 years ago
1
New parameter: GPS satellites required for setting home

#704 GoogleCodeExporter opened 8 years ago
5
arduino 0023 compiler error on arducopter 2.7 and 2.7.1

#703 GoogleCodeExporter closed 8 years ago
3
Enhancement request

#702 GoogleCodeExporter closed 8 years ago
11
Small MP bug in Camera set-up

#701 GoogleCodeExporter closed 8 years ago
2
When GPS_PROTOCOL defined to MTK16 instead of AUTO APM must be reset otherwise doesn't get lock and wont communicate with GPS

#700 GoogleCodeExporter closed 8 years ago
1
pb to start APM...

#699 GoogleCodeExporter opened 8 years ago
5
90 degrees heading error

#698 GoogleCodeExporter closed 8 years ago
3
for new 3DR Ublox-LEA6 the GPS driver does not seem to update 3D fix field

#697 GoogleCodeExporter opened 8 years ago
3
APM config issues

#696 GoogleCodeExporter closed 8 years ago
1
Mission Planner Help Links don't connect

#695 GoogleCodeExporter closed 8 years ago
3
Some Geofence Tab text in black instead of white - MP1.1.99

#694 GoogleCodeExporter closed 8 years ago
3
APM Controls Throttle in FBW_A

#693 GoogleCodeExporter closed 8 years ago
6
CH6 tuning - visual output of values

#692 GoogleCodeExporter opened 8 years ago
0
CH6 tuning shows only Min or Max, nothing in between.

#691 GoogleCodeExporter closed 8 years ago
5
MissionPlanner: Small column header bug in Flight Planner screen's WayPoints section

#690 GoogleCodeExporter closed 8 years ago
1
adding rfcomm Devices to the list of Portnames in ArdupilotMegaPlanner

#689 GoogleCodeExporter closed 8 years ago
2
ArdupilotMegaPlanner10.exe on Mono, always finding update, fails to restart after update.

#688 GoogleCodeExporter closed 8 years ago
4
Enhancement request (Arduplane & APM Planner): native RSSI & Battery_Voltage_B readings.

#687 GoogleCodeExporter closed 8 years ago
7
Servo limits (maximum throw) is not working in stabilize, fbw and other modes.

#686 GoogleCodeExporter opened 8 years ago
2
MAVLink 1.0 send_heartbeat() system_status should match extended status

#685 GoogleCodeExporter closed 8 years ago
5
ppm encoder does not read the radio input from the receiver quite well

#684 GoogleCodeExporter opened 8 years ago
2
APM Planner (Antenna Tracking)

#683 GoogleCodeExporter closed 8 years ago
6
coding issue in arduplane

#682 GoogleCodeExporter closed 8 years ago
3
U-blox NMEA GGA parcing problem

#681 GoogleCodeExporter opened 8 years ago
0
FBW_B elevator is reversed

#680 GoogleCodeExporter closed 8 years ago
6
can not use the latest mission planner to download mega for APM1

#679 GoogleCodeExporter closed 8 years ago
3
Mission Planner installed incompatible firmware

#678 GoogleCodeExporter closed 8 years ago
2
Does not switch mode when receiver goes to failsafe

#677 GoogleCodeExporter opened 8 years ago
2
Timeout by Update at start 1.1.92/1.1.94

#676 GoogleCodeExporter closed 8 years ago
7
NOT COM PORT AND NOT USB RECOGNIZED

#675 GoogleCodeExporter opened 8 years ago
2
Pull request: Use Arduino tools (avr-gcc, avr-g++, avr-gdb, etc.) on Linux like on OS X and Windows

#674 GoogleCodeExporter opened 8 years ago
2
Can't get to command line mode via 3dr radio

#673 GoogleCodeExporter closed 8 years ago
2

Previous Next