-
Hi,
I have been playing with phidget API and have used the corresponding example "advancedServo.js" as a starting point to get the Advanced Servo unit working.
Using the set method I can successfu…
-
The same user who reported the issue https://github.com/tork-a/rtmros_nextage/issues/332 is experiencing that the `servoOn` command does not turn the servos on, claiming "Once the servos are off for w…
-
```
What steps will reproduce the problem?
1. Launch the GUI then connect to the copter
2. Click on the FC Config tab
3. See all servos "unused" instead of 3 first used
What is the expected output? W…
-
### What needs to change?
We will need to design a library to speak with the new ball shooter/actuator board. This board will likely include two controls:
1. Spin up the motors quickly
2. Drop a …
-
I've started using the this library to get my Delta ASDA-A2 drives up and running and I really love using the library so far. Everything seems to be working great when directly reading and writing to …
-
ESC connected to LED pin (servo 13)
SERVO_BLH_3DMASK,0
SERVO_BLH_AUTO,1
SERVO_BLH_DEBUG,0
SERVO_BLH_MASK,4096
SERVO_BLH_OTYPE,4
SERVO_BLH_POLES,14
SERVO_BLH_PORT,0
SERVO_BLH_RVMASK,0
SERVO_BL…
-
## Current Behavior
One of Motor mappings with the target FLYWOOF745 uses port E13.
## Steps to Reproduce
1. Flash the iNav version 7.
## Expected behavior
The motors shall be mapped as follo…
-
Hello,
I was wondering if this library would recognize a Hitec HSR-M9382TH servo motor if connected (since they both use the DPC-11 programmer figured it might be worth a shot)? So far I've been un…
-
I use mu editor, when I connect PCA9685 to microbit with slave address "0x41". The microbit gives me that "no module pca9685".
from microbit import sleep, i2c
import PCA9685
import servo
# …
-
Hi:
The camera trajectory is not converging to the optimal position.How to modify the code?