-
## Problem
- Device: ESP32-S3-Wroom-1
When we try to command more than two servos, only the two servo motors function as expected. The rest does not move at all. All servos individually run if on…
-
-
The same user who reported the issue https://github.com/tork-a/rtmros_nextage/issues/332 is experiencing that the `servoOn` command does not turn the servos on, claiming "Once the servos are off for w…
-
```
I am running a ruddervator airplane and I need to reverse the direction of
channel 2 and 4. When I set RC2_REV and RC4_REV to -1 and write params, the
direction of the servos do not change.
```
…
-
```
I am running a ruddervator airplane and I need to reverse the direction of
channel 2 and 4. When I set RC2_REV and RC4_REV to -1 and write params, the
direction of the servos do not change.
```
…
-
```
I am running a ruddervator airplane and I need to reverse the direction of
channel 2 and 4. When I set RC2_REV and RC4_REV to -1 and write params, the
direction of the servos do not change.
```
…
-
```
I am running a ruddervator airplane and I need to reverse the direction of
channel 2 and 4. When I set RC2_REV and RC4_REV to -1 and write params, the
direction of the servos do not change.
```
…
-
```
I am running a ruddervator airplane and I need to reverse the direction of
channel 2 and 4. When I set RC2_REV and RC4_REV to -1 and write params, the
direction of the servos do not change.
```
…
-
DONE: When modified current servo to work for two speed controllers and have been tested
-
Please provide specifications for slip ring and servos; ideally links to Amazon items.
fraab updated
5 months ago