-
### Robot Name 🤖
ergoCub 1.0 S/N:000
### Request/Failure description
One of the neck cable is broken and should be replaced.
![photo1693907073](https://github.com/robotology/icub-tech-supp…
-
Hi there i am new to all this programming stuff i have a mks sgen v1 with tmc2209 on x, y, z, e1, axis and lv8729 on e0 i am trying to get sensor less homeing to work and dual z motors z, e1
i am…
-
David, Laurens,
We are having trouble running the our [Birthday Cake Cutter program](https://github.com/pybricks/pybricks-projects/pull/67) reliably for a long time. The Inventor Hub keeps turning …
-
I'v got an BIGTREETECH SKR 1.4 Turbo connected to the TFT 35 V2 using the RS232 Port on the TFT and the TFT port on the board. Updated the screens firmware, set the baudrate @ 250000 on both Marlin (o…
-
### Feature request
**Is your feature request related to a problem? Please describe.**
Attitude estimation with "cheap" sensors found in most of the market autopilots might sometimes be a trouble …
-
### Robot Name 🤖
ergoCub 1.0 S/N:000
### Request/Failure description
During a walking experiment, one of the neck cables went out.
### Detailed context
Nothing
### Additional context
_No respon…
-
I try to send a file (a g-code) using web ui, but it is not able to write sd card (trying with differents sd card)....transfert is shown completed (100%), but no files are on the media, althought I ca…
-
hi to everyone
I have some questions in simulating a cabel robot in mujoco. actually my problem is to modeling the cables. at first I used tendon to modeling my cables because of some good features…
-
I was playing around with the huskylens sensor sample class and whenever i ran it i got "Error communicating with I2C device(s) 'huskylens'. Check your wiring and configuration" on the driver station …
-
### What happened?
i did the instruction on the page,until the command ls /dev | grep ttyDXL didn't return anything. I also have tried the dmesg and it returned:
```
[ 3372.508332] usb 1-3: device …