-
Can this be used on dyanmixel ax18?
-
Hi i tryed to use the motors of dynamixel Ax 12A whit the controler CM 530, i watched many tutorials and instructions using the following links from Robotis
https://emanual.robotis.com/docs/en/softwa…
-
It would be great to have support for Dynamixel Actuators (especially - AX series is interested)
http://www.robotis.us/dynamixel/
http://support.robotis.com/en/product/actuator/dynamixel/ax_series…
-
Hi. i am trying to simulate openmanipulator-x with ros2 on gazebo, but i can't find any manual about simulate openmanipulator-x with ros2. So i'm wondering that how can i simulate openmanipulator-x wi…
-
how does the bus work?
similar to the can / odrive ?
do we need to route a bidirectional cable to the servos or can we split the bus in the main control area?
-
Hi,
I am following https://emanual.robotis.com/docs/en/platform/turtlebot3/autonomous_driving/ this page for learning turtle bot3 with ROS.
after setting up intrinsic and extrinsic camera ,I starte…
-
https://github.com/ROBOTIS-GIT/turtlebot3_applications
http://emanual.robotis.com/docs/en/platform/turtlebot3/autonomous_driving/autorace_gazebo
-
register 40 of the mx106 (protocol 2.0) should hold the acceleration limit (see https://emanual.robotis.com/docs/en/dxl/mx/mx-106-2/)
we do not have this implemented at the moment
## Is your fea…
-
Hello,
I am following this tutorial to build dynamixel workbench on Raspberry Pi 4 (Raspbian) and ROS Melodic:
https://emanual.robotis.com/docs/en/software/dynamixel/dynamixel_workbench/#linux-and…
-
LD08 is labeled LDS-02 in the Turtlebot 3 eManual.
https://emanual.robotis.com/docs/en/platform/turtlebot3/appendix_lds_02/#lds-02
Also, USB2LDS is required to use this package with LD08.
I think y…