-
I'm currently trying to install stormpy, and am running into installation issues. I first tried installing it in a directory `/Users/kevinzhao79/People and Robots Lab/RAG-with-Verification/` but quick…
-
I implemented RISCV SoC on a Zcu102 fpga. I am trying to use openOCD and jtag-hs2 to download code to the board as instructed in the README. I have checked the physical connection and make sure it be …
-
Chip has 4 riscv cores, when openocd debug riscv multicore, riscv.cpu0 examine pass, but other cores encounter below errors:
Error: 3406 6331102 riscv-013.c:1921 examine(): [riscv.cpu1] Debug Mod…
-
I implemented SweRV_EH1 on a Zedboard fpga. I am trying to use openOCD and Jtag Arm-USB-Tiny_H to download code to the board as instructed in the README. I have checked the physical connection and ma…
-
Hello, i am trying to program a zedboard using openocd to a ibex core. The output error is this one:
```
./util/load_demo_system2.sh halt ./sw/c/build/demo/hello_world/demo
Open On-Chip Debugger 0.…
-
Hi,
I'm trying to test the SoC on a Nexys Video FPGA. When I try to run OpenOCD after loading the bitstream to the FPGA, the following error occurs:
```
ivantaka@ivantaka-pc:~$ sudo $OPENOCD/bi…
-
The command `prism -transient 1 model.pm` where `model.pm` is the following
```prism
dtmc
module M
x : [0..2] init 0;
[] x=0 -> 0.5:(x'=1) + 0.5:(x'=2);
endmodule
```
fails to compute the …
-
Can you please verify the following values for DTM IDCODE amd DTMCS (DTM Control and status) ?
DTM IDCODE = 0x1000008B
DTM CS = 0x00000071
We are trying to verify the values when acce…
-
I implemented SweRV_EH1 on a Zedboard fpga. I am trying to use openOCD and Jtag Arm-USB-Tiny_H to download code to the board as instructed in the README. I have checked the physical connection and mak…
-
I am attempting to get the CVA6 APU running on a KC705 board.
What I have done so far:
- Cloned the CVA6 repository, installed the tools and successfully ran smoke-tests.sh
- Ran $make fpga BOA…