rodrigoenriquez ardupilot-mega issues

rodrigoenriquez / ardupilot-mega

Automatically exported from code.google.com/p/ardupilot-mega

0 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

APM 2.xx not work with different speed at 57600 in the serial3

#389 GoogleCodeExporter closed 8 years ago
7
Minimum ground speed setting for windy days

#388 GoogleCodeExporter closed 8 years ago
1
Make the dual rates and expo be airspeed dependant

#387 GoogleCodeExporter opened 8 years ago
2
APM reset issue

#386 GoogleCodeExporter closed 8 years ago
2
APM Mission Planner Crashes on startup

#385 GoogleCodeExporter closed 8 years ago
3
MUXd outputs not producing signal

#384 GoogleCodeExporter closed 8 years ago
1
Plane banks further than max bank if stick input is given in auto mode.

#383 GoogleCodeExporter closed 8 years ago
4
Yaw PID does not apply any rudder.

#382 GoogleCodeExporter closed 8 years ago
6
Make Auto Zoom Configurable in FlightPlanner tab of Mission Planner

#381 GoogleCodeExporter closed 8 years ago
2
integer division problem in stabilize()

#380 GoogleCodeExporter closed 8 years ago
3
Stabilize mode stops RC input from reaching servos and Speed control

#379 GoogleCodeExporter closed 8 years ago
6
Add an offset in the CLI setup for tail draggers to compensate for their angle

#378 GoogleCodeExporter opened 8 years ago
5
APMPlanner 1.0.26 Default Alt saved @ 195 meters - when loaded Default Alt @ -0.01

#377 GoogleCodeExporter closed 8 years ago
2
Error in navigation code

#376 GoogleCodeExporter closed 8 years ago
5
Trasparent mode embedded in atmega 328

#375 GoogleCodeExporter closed 8 years ago
1
Once the relay is turned on - it can not be turned off

#374 GoogleCodeExporter closed 8 years ago
3
dual channel ailerons with differential + mix with rudder

#373 GoogleCodeExporter closed 8 years ago
4
Magnetometer activation not effective in setup - APM

#372 GoogleCodeExporter closed 8 years ago
3
APM Planner 1.0.x HUD displays incorrectly in large DPI (125%)

#371 GoogleCodeExporter closed 8 years ago
7
APMPlanner 1.0.14 does not load missions correctly

#370 GoogleCodeExporter closed 8 years ago
2
Add a Heading/Course option to the takeoff and land commands.

#369 GoogleCodeExporter opened 8 years ago
2
Google Maps Max Zoom Level

#368 GoogleCodeExporter closed 8 years ago
2
fly to here does not work

#367 GoogleCodeExporter closed 8 years ago
3
Add an "Ardupilot Mega First Time Setup" Button to planner firmware screen

#366 GoogleCodeExporter closed 8 years ago
5
THROTTE_FS_VALUE Misspelled in Config.h

#365 GoogleCodeExporter closed 8 years ago
2
APM Planner 1.x

#364 GoogleCodeExporter closed 8 years ago
3
RTL and Auto modes can't turn on.

#363 GoogleCodeExporter closed 8 years ago
7
Enhancement request

#362 GoogleCodeExporter closed 8 years ago
1
Offline Map Support in APM Planner

#361 GoogleCodeExporter closed 8 years ago
1
Flight Mode Zero (0) not recognized in APM Planner - Mode Numbers also confusing in CLI

#360 GoogleCodeExporter closed 8 years ago
5
Setting some PID values fail

#359 GoogleCodeExporter closed 8 years ago
7
Error opening serial port System.Exception: Missed ID expecting 0 got 11

#358 GoogleCodeExporter closed 8 years ago
4
APM Planner 1.0.1 Mission Command Reorder Error

#357 GoogleCodeExporter closed 8 years ago
2
APMPlanner 1.0.0 waypoint selection not working

#356 GoogleCodeExporter closed 8 years ago
6
APMPlanner 1.0.0 only displays in m/s for speed and m for altitude

#355 GoogleCodeExporter closed 8 years ago
4
GSC Support for DroneCell

#354 GoogleCodeExporter closed 8 years ago
5
Stabilize should be throttle passthrough

#353 GoogleCodeExporter closed 8 years ago
2
Log download does not work

#352 GoogleCodeExporter closed 8 years ago
14
Change default INPUT_VOLTAGE

#351 GoogleCodeExporter closed 8 years ago
6
APM Planner "upload succeeded, but verify failed"

#350 GoogleCodeExporter closed 8 years ago
2
RX and TX leds in IMU shield(OIL PAN) inverted.

#349 GoogleCodeExporter closed 8 years ago
1
Can't load APM1280 firmware

#348 GoogleCodeExporter closed 8 years ago
2
Modes do not change on GCS.

#347 GoogleCodeExporter closed 8 years ago
6
Missing definition of GPS_PROTOCOL_AUTO

#346 GoogleCodeExporter closed 8 years ago
2
optional placement

#345 GoogleCodeExporter closed 8 years ago
2
Scaling of remaining battery

#344 GoogleCodeExporter closed 8 years ago
2
FBW B response to the RC stick is reversed

#343 GoogleCodeExporter closed 8 years ago
11
The latest Mission Planner Firmware Update 'Update Check' shows Ardupilot Mega 2.1 NOT Ardupilot Mega 2.11.

#342 GoogleCodeExporter closed 8 years ago
2
Menu simplification

#341 GoogleCodeExporter closed 8 years ago
6
Waypoint loading error

#340 GoogleCodeExporter closed 8 years ago
5