issues
search
ToyKeeper
/
anduril
Anduril 2 Flashlight Firmware and FSM UI Toolkit
GNU General Public License v3.0
213
stars
52
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
PDF / HTML / DOCX manuals from Markdown
#98
class101
opened
3 days ago
3
Fix strobe mode (#94).
#97
fwiffo
opened
1 week ago
0
Bug: Jump-start flashes channels that should remain off on dual-channel lights under some circumstances (example fix attached)
#96
fwiffo
opened
1 week ago
0
Request: Lower moonlight levels on dual-channel lights (example implementations attached)
#95
fwiffo
opened
1 week ago
0
Bug: Can't access strobe mode on dual-channel Emisar D4V2
#94
fwiffo
opened
1 week ago
1
Bug: Voltage readout doesn't display correctly <1V (AA lights)
#93
jan-Sanku
opened
3 weeks ago
2
Protect voltage readout against modification from ISR
#92
SammysHP
opened
3 weeks ago
0
Bug: Voltage readout sometimes mixes digits
#91
jan-Sanku
opened
3 weeks ago
2
Add Wurkkos TS10 RGB with reduced FET output
#90
SammysHP
closed
2 weeks ago
1
Refactor and extend aux patterns
#89
SammysHP
opened
1 month ago
0
Request: Add support for 3V batteries
#88
travisce
closed
1 month ago
2
Question: For Lightning, is 1H to "Interrupt current flash or start new one" a feature or not?
#87
dirtydancing
closed
1 month ago
4
Add emisar-2ch-joined-nofet
#86
SiteRelEnby
opened
1 month ago
0
Request: Remove strobes/lightning from "Extended Simple" UI
#85
lukestein
closed
1 month ago
1
Request: New Model Number for Single Channel D4SV2 with RGB Switch & FFL351A Emitter/Driver
#84
Gymbow2007
opened
1 month ago
3
Flash in lockout mode with '1h' or '2h' and a low light setting
#83
void-spark
closed
1 month ago
12
Allow turning off 'use post off voltage' from device configuration
#82
void-spark
opened
2 months ago
0
Bug: Sometimes can’t dim from top of ramp (D3AA)
#81
lukestein
opened
3 months ago
5
Adding some model-specific readme files
#80
SiteRelEnby
opened
3 months ago
0
Request: Make tactical mode slots stay on after holding the button for X amounts of seconds.
#79
maru801
opened
3 months ago
2
Question: Button LED brightness when ramping
#78
Mugrunty
opened
3 months ago
1
D3AA has a bug when manually exiting version check.
#77
maru801
opened
3 months ago
2
arch: attiny1634: Use built-in temperature calibration data
#76
stcarlso
opened
3 months ago
1
Request: Don't use Smooth Steps for Momentary Moon/Momentary Low (from lockout mode)
#75
lukestein
opened
3 months ago
2
Request: Make Voltage readout decimal place user configurable
#74
Mahir291
opened
3 months ago
1
Avoid overflow of `ticks_since_adjust`.
#73
dpse
opened
3 months ago
1
Replace lockout mode with tactical?
#72
Relys
opened
4 months ago
1
Discussion: Channel mode and manual memory
#71
SiteRelEnby
opened
4 months ago
1
Bugfix (#69): tint_ramp_direction does not get reset when channel mode arg is changed by manual memory
#70
SiteRelEnby
opened
4 months ago
0
Bug: 2 channel memory switching channels
#69
crox
opened
4 months ago
2
d3aa: Fix D3AA build without party strobe enabled
#68
stcarlso
opened
4 months ago
2
Enable use of USE_INDICATOR_LED with a fw3x-lume1 driver
#67
dognodding
opened
4 months ago
2
Add default handlers for thermal regulation
#66
dpse
opened
4 months ago
2
When using aux LEDs as channels, the lowest mode turns the LEDs off
#65
aslotnick
closed
4 months ago
2
Bug: wrong channel_mode during animations
#64
readableness
opened
4 months ago
0
Bugfix: channel_mode for strobe->off, start on ramp
#63
readableness
opened
4 months ago
1
Police Strobe no output when main channel has lowest output saved
#62
duncanyoyo1
closed
4 months ago
4
Added construction mode to strobe
#61
crox
opened
5 months ago
0
Request: Add construction sequence to strobe mode options
#60
crox
opened
5 months ago
0
Feature/user customization
#59
crox
closed
5 months ago
2
Request: adding thermal regulation to blinking modes
#58
Carpe-Diem-Postero
opened
5 months ago
19
Per-user config implementation, reworked and extended
#57
SiteRelEnby
opened
5 months ago
5
Question on Sofirn SP36 hex
#56
tonurics
opened
5 months ago
1
Anduril 2 today's release 2024-04-01 not working
#55
dirtydancing
closed
5 months ago
2
Add German translation for README and docs, including language linking.
#54
dognodding
opened
6 months ago
0
Translations of README and manual.
#53
dognodding
opened
6 months ago
0
Allow manually running GitHub actions workflows
#52
SiteRelEnby
closed
5 months ago
2
Improve manual - add links for navigability, and an FAQ
#51
SiteRelEnby
opened
6 months ago
0
New feature: Select previous channel mode with 4C, optionally instead of 4C ramp -> lock
#50
SiteRelEnby
opened
6 months ago
0
Bugfix: Prevent switching channel modes when in tactical mode
#49
SiteRelEnby
closed
5 months ago
1
Next