-
Hi, I am filling this issue to review couple of Lint issues inside Veer RTL.
1. In **el2_veer.sv** file, below highlighted signals are read but never set.
assign ifu_axi_bready_int …
-
to increase bandwidth and to to reduce AHB latency
-
### setuptools version
70.0.0
### Python version
Python 3.12
### OS
Mac M2 Pro Max, Mac M1 Pro
### Additional environment information
[metadata]
name = backend
description = backend
author =…
-
Renode supports at the moment the following AMBA protocols:
- APB
- AXI-Lite
- AXI
AHB support is missing at the moment and it will be great if Renode adds support for it.
-
In Chipyard/generators/Rocket-chip/src/main/scala/SubSystem/Config.scala
In Class WithDefaultMMIOPort, I change the ExtBus => ExtBusAHB
In Chipyard/generators/Rocket-chip/src/main/scala/SubS…
HC-Lo updated
2 years ago
-
Hi,
fpga_optimize defaults to 1 and it cannot be set to 0 on the command line (cannot receive a parameter and if not defined will be set to default value 1 !).
If this value shall never be set to 0,…
-
*rogerpueyo:*
The ath79/mikrotik MikroTik SXT Lite images (initramfs, sysupgrade) are missing the MikroTik Routerboard platform drivers. Therefore, the hard_config and soft_config partitions are not …
-
Hi,
I've checked out you "verilog-axi" repo (which is really cool and contains pretty much all the AXI tools) and I've found a bug in the AXIL crossbar where it doesn't support M_ADDR_WIDTH < 12. …
-
I am using the most recent version of OpenWRT (21.02.1)
```
root@OpenWrt:~# opkg list | grep ath10k
ath10k-board-qca4019 - 20201118-3
ath10k-firmware-qca4019-ct - 2020-11-08-1
kmod-ath10k-ct -…
-
I finally got my CrossLink-NX evaluation board (with a LICFL-40-8BG400C) and I put together a PCIe x1 to SMA board (https://github.com/teknoman117/PCIEX1-SMA) which I'm currently waiting on to arrive …