issues
search
nobletoll
/
powersdr-if-stage
Automatically exported from code.google.com/p/powersdr-if-stage
Other
0
stars
0
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
Fatal Error
#180
GoogleCodeExporter
closed
9 years ago
2
Investigate contributed code for increasing panadapter resolution at sample rates higher than 48Khz
#179
GoogleCodeExporter
opened
9 years ago
2
Add dynamic adjustment of waterfall level (contributed code)
#178
GoogleCodeExporter
opened
9 years ago
0
PowerSDR-IF STage
#177
GoogleCodeExporter
closed
9 years ago
4
Audio Distortion
#176
GoogleCodeExporter
closed
9 years ago
5
60 Meter band button in PowerSDR/IF causes exception.
#175
GoogleCodeExporter
closed
9 years ago
1
Test Alpha 8100 support added by W1CEG
#174
GoogleCodeExporter
opened
9 years ago
0
Disable all hardware types (Demo, Flex-5000,etc) except for SDR-1000, so that no other hardware can be selected.
#173
GoogleCodeExporter
opened
9 years ago
4
FT-950 60M Memories
#172
GoogleCodeExporter
closed
9 years ago
6
Transverter Selection when window is collapsed.
#171
GoogleCodeExporter
opened
9 years ago
1
Problem with Swap I/Q and Transverters.
#170
GoogleCodeExporter
opened
9 years ago
2
Waterfall level hangs on startup.
#169
GoogleCodeExporter
opened
9 years ago
0
K3: MultiRX switch in PSDR and sub-button on K3 not linked
#168
GoogleCodeExporter
opened
9 years ago
0
K3: VFO A/B switching will corrupt BW settings if A and B have different BW's
#167
GoogleCodeExporter
closed
9 years ago
3
K3: sub RX in pan-display switches off when out of pan-range
#166
GoogleCodeExporter
opened
9 years ago
2
K3 IF BW of SubRX on pan-display also changes if main RX BW control is touched
#165
GoogleCodeExporter
closed
9 years ago
2
V1.19.3.5 Power SDR IF . Looses settings
#164
GoogleCodeExporter
closed
9 years ago
3
No DSP image adjustment on TS-940 using softrock40
#163
GoogleCodeExporter
closed
9 years ago
2
Will not connect to HRD 1.19.3.5
#162
GoogleCodeExporter
closed
9 years ago
3
Error code 2908
#161
GoogleCodeExporter
closed
9 years ago
2
Change default CAT polling times for TS-950 rig type
#160
GoogleCodeExporter
opened
9 years ago
0
Support configuring which ASIO channel is used on the soundcard
#159
GoogleCodeExporter
opened
9 years ago
0
Can,t complete install procedure on a system without a Soundblaster compliant soundcard.
#158
GoogleCodeExporter
closed
9 years ago
4
TX Multimeter seems to hang up while transmitting
#157
GoogleCodeExporter
opened
9 years ago
0
MUT state get corrupted if you turn it off while transmitting
#156
GoogleCodeExporter
opened
9 years ago
2
same CAT settings of Rev.1.19.0.2 don´t work with new 1.19.3.4
#155
GoogleCodeExporter
closed
9 years ago
1
Make all comboboxes in SetupIF a consistent DropDownList style.
#154
GoogleCodeExporter
closed
9 years ago
2
Implement IF Shift Syncing on K3
#153
GoogleCodeExporter
opened
9 years ago
0
Improve Filter Width Polling while adjusting on the Rig
#152
GoogleCodeExporter
closed
9 years ago
3
Mode buttons do not light up correctly when in collapsed mode with both band and mode buttons visible.
#151
GoogleCodeExporter
closed
9 years ago
1
Panadapter does not work with K3 K144XV internal 2m XVTR
#150
GoogleCodeExporter
closed
9 years ago
3
Filter Width Rig Polling option should be able to turn off syncing in both directions
#149
GoogleCodeExporter
closed
9 years ago
2
Implement direct band up/down or change so that band specific settings are restored
#148
GoogleCodeExporter
opened
9 years ago
0
PowerSDR/IF Stage 1.19.3.x installer should require .NET 3.5 SP1
#147
GoogleCodeExporter
closed
9 years ago
1
FA no longer works in PowerSDR CAT Control
#146
GoogleCodeExporter
closed
9 years ago
5
Image Rejection randomly quits
#145
GoogleCodeExporter
closed
9 years ago
1
Bug in Incoming Serial Parsing for PowerMaster
#144
GoogleCodeExporter
closed
9 years ago
1
Failure to start under Windows 7
#143
GoogleCodeExporter
closed
9 years ago
7
CW is reversed on 6M
#142
GoogleCodeExporter
closed
9 years ago
4
K3 DATA Modes set PowerSDR incorrectly
#141
GoogleCodeExporter
opened
9 years ago
4
Switching bands leading to a mode change between SSB and CW results in VFO change
#140
GoogleCodeExporter
closed
9 years ago
6
6 meter signals off by 2Khz in Panadapter on the K3
#139
GoogleCodeExporter
opened
9 years ago
10
Change "Report Bug" Menu Item to go to PowerSDR/IF Stage Issues "New Issue" Page
#138
GoogleCodeExporter
closed
9 years ago
2
Default Setup for K3 appears to be incorrect
#137
GoogleCodeExporter
closed
9 years ago
2
Provide a "Collapsible Display" Mode for the Console
#136
GoogleCodeExporter
closed
9 years ago
2
Automatic calibration of signal levels between K3 S-Meter and PowerSDR/IF Stage
#135
GoogleCodeExporter
opened
9 years ago
5
TX signal is off frequency in the panadapter from K3
#134
GoogleCodeExporter
opened
9 years ago
1
REGRESSION: K3 goes into transmit when powering on when RTS keying is turned on
#133
GoogleCodeExporter
closed
9 years ago
2
Support CWX window for K3
#132
GoogleCodeExporter
opened
9 years ago
2
CAT control and Spectrum display stops
#131
GoogleCodeExporter
closed
9 years ago
10
Previous
Next