sylvandb gruvin9x issues

sylvandb / gruvin9x

Automatically exported from code.google.com/p/gruvin9x

0 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Watchdog TImer reboot fails to re-start system properly

#98 GoogleCodeExporter opened 8 years ago
1
Font colour is no good

#97 GoogleCodeExporter opened 8 years ago
4
THR and AIL switch

#96 GoogleCodeExporter closed 8 years ago
10
Low bat alarm doesn't sound when voltage is below 4.9V (first noted on frsky/stock board.)

#95 GoogleCodeExporter closed 8 years ago
6
SIMU hangs when trying to format virtual EEPROM

#94 GoogleCodeExporter opened 8 years ago
33
main_views.cpp telemetry views broken (trunk)

#93 GoogleCodeExporter closed 8 years ago
15
Makefile header text is out of date

#92 GoogleCodeExporter closed 8 years ago
2
Add 'make fuses' capability to Makefile

#91 GoogleCodeExporter closed 8 years ago
1
Code not compatible with up-to-date build environment (gcc 4.6.2, avr-libc 1.8.0)

#90 GoogleCodeExporter closed 8 years ago
13
Channel order and fail safes

#89 GoogleCodeExporter opened 8 years ago
7
Frsky vario/altimeter reset altitude

#88 GoogleCodeExporter closed 8 years ago
9
Patch for /branches/frsky/src/main_views.cpp

#87 GoogleCodeExporter closed 8 years ago
10
TRIM values as inputs..

#86 GoogleCodeExporter opened 8 years ago
10
Trainer SW in FUNC SWITCHES messed up

#85 GoogleCodeExporter closed 8 years ago
14
Flight Phase Name last pixel column interference

#84 GoogleCodeExporter closed 8 years ago
2
TX Power on ALERT: THR not idle

#83 GoogleCodeExporter closed 8 years ago
3
Batt Volts calibration (ANA Screen) and BG averaging.

#82 GoogleCodeExporter closed 8 years ago
4
All Switches and Channels on display

#81 GoogleCodeExporter closed 8 years ago
22
source of mix is Channel with FlightPhases

#80 GoogleCodeExporter closed 8 years ago
5
T-Trim switch

#79 GoogleCodeExporter closed 8 years ago
8
Trunk won't boot on V4 board

#78 GoogleCodeExporter closed 8 years ago
4
Patch for /trunk/firmware/src/file.cpp

#77 GoogleCodeExporter closed 8 years ago
3
Batery Voltage calculatin

#76 GoogleCodeExporter closed 8 years ago
6
FightPhase FadeIN/OUT

#75 GoogleCodeExporter closed 8 years ago
25
Move/Copy model should not write EEPROM until user confirms the action

#74 GoogleCodeExporter closed 8 years ago
14
Model move/copy should not do the move/copy until finally confirmed

#73 GoogleCodeExporter closed 8 years ago
9
NoKey should NOT disable trim switch beeps

#72 GoogleCodeExporter opened 8 years ago
0
Order of DR/EXPO lines affect whether switch works or not

#71 GoogleCodeExporter closed 8 years ago
34
DR/Expo data fails to convert/translate r1197

#70 GoogleCodeExporter closed 8 years ago
12
DR/Expo bugs -- crashes and curves bad

#69 GoogleCodeExporter closed 8 years ago
4
Writing to SD card of unknown format causes catastrophic crash

#68 GoogleCodeExporter opened 8 years ago
2
Replace SD card board with new Audio/File Storage Subsystem

#67 GoogleCodeExporter opened 8 years ago
1
RTC and SD card functions broken

#66 GoogleCodeExporter closed 8 years ago
2
Curve editor bugs / nusenses

#65 GoogleCodeExporter closed 8 years ago
3
Moving/Copying past 16 back to 01 in model menu corrupts data

#64 GoogleCodeExporter closed 8 years ago
8
Stick mode changes not correctly handled

#63 GoogleCodeExporter opened 8 years ago
4
WDT reset when trying to access model menu

#62 GoogleCodeExporter closed 8 years ago
12
"Working" or "Busy..." during model load operations

#61 GoogleCodeExporter closed 8 years ago
3
Have DR/EXPO channel order comply with system setting

#60 GoogleCodeExporter opened 8 years ago
4
As at r1101 -- Heli Setup template does not apply correctly.

#59 GoogleCodeExporter closed 8 years ago
4
EXPO/DR screen should show Flight Phase switches

#58 GoogleCodeExporter closed 8 years ago
26
EDIT FLIGHT PHASE -- cursor moves when not in edit mode (Name field)

#57 GoogleCodeExporter closed 8 years ago
2
v3 EEPROM EXPO/DR conversion error

#56 GoogleCodeExporter closed 8 years ago
6
Mixer screen digit overlap

#55 GoogleCodeExporter closed 8 years ago
3
System seems to lock momentarily every second or so

#54 GoogleCodeExporter closed 8 years ago
4
Possible model list redesign? No more numbers? Low priority.

#53 GoogleCodeExporter closed 8 years ago
4
V4 / Hardware PPM -- pulse polarity cannot be changed

#52 GoogleCodeExporter closed 8 years ago
4
Spektrum TX module requires fixed PPM frame length

#51 GoogleCodeExporter closed 8 years ago
3
Trim Sw and Trainer switches

#50 GoogleCodeExporter closed 8 years ago
9
Consider ways to make deleting models more safe

#49 GoogleCodeExporter closed 8 years ago
24