bubgum crw-cmu issues - Githubissues

bubgum / crw-cmu

Automatically exported from code.google.com/p/crw-cmu

0 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

PhotoIntentActivity doesn't build

#65 GoogleCodeExporter opened 9 years ago
0
Unable to create boat and change coordinates in FishFarm GUI if start with WiFi enabled

#64 GoogleCodeExporter opened 9 years ago
1
Nexus S #3 cannot connect to Amarinos

#63 GoogleCodeExporter closed 9 years ago
2
HTC EVO 3D unable to connect to Arduino via Bluetooth

#62 GoogleCodeExporter opened 9 years ago
0
Delay in displaying the lawnmower pattern in the fishfarm gui

#61 GoogleCodeExporter opened 9 years ago
0
Phone reboots automatically when in use in the field

#60 GoogleCodeExporter opened 9 years ago
0
Server hangs when started

#59 GoogleCodeExporter opened 9 years ago
0
UdpVehicleServer.captureImage creates oversized UDP packets

#58 GoogleCodeExporter opened 9 years ago
0
Exception is thrown sometimes while adding the first boat in the fishfarm GUI

#57 GoogleCodeExporter closed 9 years ago
4
Exception in fishfarm while switching to auto mode

#56 GoogleCodeExporter closed 9 years ago
2
Fishfarm GUI throws an exception each time while adding a boat after the first one

#55 GoogleCodeExporter closed 9 years ago
4
Cannot set PID gains from the teleop frame and from the client

#54 GoogleCodeExporter closed 9 years ago
4
Lawn-Mower pattern display error in fishfarm gui

#53 GoogleCodeExporter closed 9 years ago
3
Autonomous check box display error in Teleop panel in fishfarm GUI

#52 GoogleCodeExporter opened 9 years ago
2
Debug GUI on the phone sometimes displays incorrect gains in the ICS ver

#51 GoogleCodeExporter closed 9 years ago
2
Increase thruster value for turns

#50 GoogleCodeExporter closed 9 years ago
3
Cannot run the fish farm gui while connected to the bullet

#49 GoogleCodeExporter opened 9 years ago
1
Move permissions to google group

#48 GoogleCodeExporter opened 9 years ago
1
Boats stop without planning while in autonomous mode

#47 GoogleCodeExporter opened 9 years ago
5
Fish farm client simulator throws warnings occasionally

#46 GoogleCodeExporter closed 9 years ago
1
Unknown exceptions

#45 GoogleCodeExporter closed 9 years ago
2
Pictures are flipped in the debug gui

#44 GoogleCodeExporter opened 9 years ago
1
Pause in sending navigation commands when picture is being taken

#43 GoogleCodeExporter closed 9 years ago
2
UdpVehicleService stops responding after a few seconds on certain phones.

#42 GoogleCodeExporter closed 9 years ago
2
After cancel waypoint the purple marker does not clear

#41 GoogleCodeExporter opened 9 years ago
1
Cancel waypoint and new waypoint does not work in the udp simulator

#40 GoogleCodeExporter closed 9 years ago
4
Two boats appeared on the GUI when only using one boat.

#39 GoogleCodeExporter closed 9 years ago
2
Large delay when using tele-op (manual control)

#38 GoogleCodeExporter opened 9 years ago
5
Image capture doesn't work in operator console

#37 GoogleCodeExporter closed 9 years ago
3
Status lost, apparently different exception thrown

#36 GoogleCodeExporter closed 9 years ago
1
Lost status reports

#35 GoogleCodeExporter closed 9 years ago
4
Server crashes while trying to set a waypoint without canceling the previous waypoint

#34 GoogleCodeExporter closed 9 years ago
2
Thruster stopps during navigation to a waypoint

#33 GoogleCodeExporter opened 9 years ago
1
Autonomous indicator checkbox in the debugging panel does not show checked while in autonomous mode

#32 GoogleCodeExporter opened 9 years ago
0
Cannot scroll in the command and control tabs in the boat debug panel

#31 GoogleCodeExporter closed 9 years ago
2
Not able to assign area for the boat on the client once in a while

#30 GoogleCodeExporter opened 9 years ago
0
Server crashes while trying to set a waypoint in the new client

#29 GoogleCodeExporter closed 9 years ago
2
Error when selecting "Autonomous" in the GUI

#28 GoogleCodeExporter closed 9 years ago
2
GUI produces errors when it is ran

#27 GoogleCodeExporter closed 9 years ago
1
GUI stops when "create boat is pressed"

#26 GoogleCodeExporter opened 9 years ago
0
Bluetooth disconnects randomly

#25 GoogleCodeExporter opened 9 years ago
1
Could not set a waypoint

#24 GoogleCodeExporter closed 9 years ago
3
Ros won't run on the phone

#23 GoogleCodeExporter closed 9 years ago
4
In Autonomous mode, boat would stop halfway to waypoint, pause 20secs then continue.

#22 GoogleCodeExporter closed 9 years ago
3
Server go unresponsive for brief intervals

#21 GoogleCodeExporter closed 9 years ago
3
Server crashed when tried to connect the client to the server

#20 GoogleCodeExporter closed 9 years ago
3
Unable to communicate with the server anymore when attempted to retrive images

#19 GoogleCodeExporter closed 9 years ago
6
Move set autonomous toggle to the command tab

#18 GoogleCodeExporter closed 9 years ago
1
rostopic list fails when roscore is running on the phones

#17 GoogleCodeExporter closed 9 years ago
2
Unable to connect to the server with the client (on Adrian's MBP)

#16 GoogleCodeExporter closed 9 years ago
1